Messages

1

22.7 Legacy Series / Re: I provided an incorrect IP address for the OPT1 gateway during network setup

« on: August 21, 2022, 06:48:29 pm »

The change of the gateway  IP address applies to the OPT1 bridge

2

22.7 Legacy Series / I provided an incorrect IP address for the OPT1 gateway during network setup

« on: August 21, 2022, 06:13:20 pm »

Hi

I provided an incorrect IP address for the OPT1 gateway during network setup.
The device is already installed in DC and works fine, but I cannot access it via the GUI.
I have access to the device via IPMI / BMC.
How can I change the IP for the OPT1 gateway to keep the device running ?.

Gonzo

3

18.1 Legacy Series / Suricata turned herself off

« on: March 27, 2018, 03:08:27 pm »

Hi

Suricata turned herself off. It happened again. What could be the reason ?

Gonzo

4

18.1 Legacy Series / Re: how to delete an entry from: Firewall => Diagnostics => pfTables

« on: March 07, 2018, 07:31:43 am »

After firewall reboot, "my" entries in pfTables have been removed. I made an update to the latest version 18.1.3.

It's like Franco said, thank you very much for your help.

5

18.1 Legacy Series / Re: how to delete an entry from: Firewall => Diagnostics => pfTables

« on: March 06, 2018, 08:49:05 pm »

servers work around the clock. I planned a firewall reboot tomorrow at around 7 am.

6

18.1 Legacy Series / Re: how to delete an entry from: Firewall => Diagnostics => pfTables

« on: March 05, 2018, 10:37:51 am »

OK, I will restart the firewall on Wednesday at 7 am, I will write to this post immediately.

7

18.1 Legacy Series / Re: how to delete an entry from: Firewall => Diagnostics => pfTables

« on: March 05, 2018, 10:23:25 am »

Franco, I do not want to take your precious time. Perhaps this is just a matter of aesthetics. On Wednesday, around 7am, I planned a firewall reboot. I'll let you know if everything worked out. Thank you very much for your help and time.

8

18.1 Legacy Series / Re: how to delete an entry from: Firewall => Diagnostics => pfTables

« on: March 05, 2018, 10:09:12 am »

Of course, you are right.
Due to the fact that my firewall is already operating in a production environment, I have to patch up the restart, I have to inform users about the interruption in the operation of services, etc. From my point of view this is a big inconvenience.

9

18.1 Legacy Series / Re: how to delete an entry from: Firewall => Diagnostics => pfTables

« on: March 05, 2018, 09:28:44 am »

OK, but in my opinion it is good to remove unnecessary tables due to aesthetic and maintaining order reasons 

10

18.1 Legacy Series / Re: how to delete an entry from: Firewall => Diagnostics => pfTables

« on: March 05, 2018, 08:57:54 am »

Franco, so I can delete tables that are now empty without performing a reboot ?

11

18.1 Legacy Series / Re: how to delete an entry from: Firewall => Diagnostics => pfTables

« on: March 05, 2018, 08:27:44 am »

Yes, I agree with you, and that's why I reported this problem yesterday as a mistake. A moment ago Franco wrote that it is enough to do a reboot. I can check it out tomorrow around 7 am. As soon as I know something, I will let you know if it works

12

18.1 Legacy Series / Re: how to delete an entry from: Firewall => Diagnostics => pfTables

« on: March 05, 2018, 07:00:46 am »

hi

Do you know any older post with this problem ?

13

18.1 Legacy Series / Re: how to delete an entry from: Firewall => Diagnostics => pfTables

« on: March 04, 2018, 08:30:00 pm »

Yes, I have removed all aliases, but pFTables entries are still visible

https://github.com/opnsense/core/issues/2240

14

18.1 Legacy Series / Re: how to delete an entry from: Firewall => Diagnostics => pfTables

« on: March 04, 2018, 06:05:08 pm »

seriously, no one knows the answer to this simple question ?

15

18.1 Legacy Series / how to delete an entry from: Firewall => Diagnostics => pfTables

« on: March 01, 2018, 09:56:37 am »

Hi

How to delete an entry from:  Firewall => Diagnostics => pfTables ?

gonzo