Messages

1

24.1 Legacy Series / Re: Audit / connectivity IPV6 problem

« on: April 03, 2024, 06:43:40 pm »

I don't know exactly what you mean with my ISP/connection... but i have tried pinging to many ipv6 sites without any problem. It just happens with the connectivity audit when it has been some time "resting". If I retry inmediately after the failed test, everything is OK.


Greetings

2

24.1 Legacy Series / Audit / connectivity IPV6 problem

« on: April 02, 2024, 07:06:57 pm »

When I run audit connectivity test, the first time I run the test, IPV4 success is 100% and IPV6 is 75% (4 packets transmitted, 3 packets received, 25.0% packet loss). If I repeat the test, both results are 100% success.

Really there's no problem in any connectivy but it's a bit strange.


Greetings

3

18.1 Legacy Series / Re: SSD causing SEND_FPDMA_QUEUED errors

« on: June 07, 2018, 08:22:30 am »

Have you seen this link?: https://forums.freebsd.org/threads/updating-bsd-from-10-to-11-ahci-ssd-issue.59923/


Cheers,

4

18.1 Legacy Series / Re: SSD causing SEND_FPDMA_QUEUED errors

« on: June 06, 2018, 10:27:41 am »

Something similar happened to me and the problem was the SATA cable. It was working fine with linux but gave problems with freebsd.  Strange but changing the cable was the solution.


Cheers,

5

18.1 Legacy Series / Re: IGMPProxy1.3 is not starting

« on: May 18, 2018, 11:55:50 am »

I have just upgraded to 18.1.8 and the problem is still there. No changes.


Cheers,

6

18.1 Legacy Series / Re: IGMPProxy1.3 is not starting

« on: April 22, 2018, 12:45:51 pm »

No, no changes. The igmproxy configuration is the same for one year.


Cheers,

7

18.1 Legacy Series / Re: IGMPProxy1.3 is not starting

« on: April 20, 2018, 11:45:33 am »

I have tried that package and the problem is still there while openvpn server is active so we're in the 'bad' 50... 


Cheers,

8

18.1 Legacy Series / Re: Trying to migrate from Pfsense, traffic shaping is really confusing

« on: April 17, 2018, 12:43:51 pm »

I set up a configuration based in that post and the information I get from www.bufferbloat.net and works quite well. Torrent with no limit, online games witch no problems (as reported by the usual gamer,  my brother).

In my experience, it's the simpliest (and effective) QOS I've ever set up.


Cheers,

9

18.1 Legacy Series / Re: Trying to migrate from Pfsense, traffic shaping is really confusing

« on: April 16, 2018, 12:14:41 pm »

Hi!

In this topic: https://forum.opnsense.org/index.php?topic=7423.0 you can see an easy way to set up a working traffic shaper. I did it and works very well.


Cheers,

10

18.1 Legacy Series / Re: IGMPProxy1.3 is not starting

« on: April 09, 2018, 05:42:10 pm »

If I disable the OpenVPN server, igmpproxy can be started manually (or rebooting) with no problem so, maybe, it's not VLAN related.


Cheers,

11

18.1 Legacy Series / Re: [CALL FOR TESTING] Speculative Execution Kernel Patch for amd64

« on: March 16, 2018, 11:04:36 am »

Everything is working OK. No problems so far. 


Cheers!

12

18.1 Legacy Series / Re: IGMPProxy1.3 is not starting

« on: March 16, 2018, 11:01:48 am »

Same problem here. My igmpproxy.conf:

quickleave
phyint igb0 downstream ratelimit 0 threshold 1
altnet 192.168.1.0/24

phyint igb1_vlan2 upstream ratelimit 0 threshold 1
altnet 172.0.0.0/8

phyint pppoe0 disabled
phyint igb1_vlan3 disabled


Cheers!

13

18.1 Legacy Series / Re: igmpproxy won't start after upgrade

« on: March 06, 2018, 08:36:14 am »

Mine is also working OK after upgrade to 18.1.3.


Cheers,

14

Tutorials and FAQs / Re: Guide on how to configure fq_codel for comcast to help with bufferbloat / QoS

« on: March 05, 2018, 11:41:48 am »

I've found another user sharing his experience: https://www.lullabot.com/articles/eliminating-robots-and-voip-glitches-with-active-queue-management. Andrew Berry gives us a similar setup with small diferences. Thanks Andrew!


Cheers!

15

Tutorials and FAQs / Re: Guide on how to configure fq_codel for comcast to help with bufferbloat / QoS

« on: March 02, 2018, 12:04:13 pm »

Great work theogravity!! Thanks so much. I've just setup it and it's working great.


Cheers!