Messages

1

17.1 Legacy Series / Re: [SOLVED] Bugs in OpenVpn Client part 17.1

« on: July 04, 2017, 01:36:08 pm »

Entirely my own fault.

Now I can reboot/save without any issues...

2

17.1 Legacy Series / Re: Bugs in OpenVpn Client part 17.1

« on: July 04, 2017, 11:28:03 am »

This might be the problem.

If I Add a CR+LF to the 618 bytes file client1.tls-auth so it's now 620 bytes.
It works. A LF only 619 bytes is not enought.

 

3

17.1 Legacy Series / [SOLVED] Bugs in OpenVpn Client part 17.1

« on: July 04, 2017, 11:11:04 am »

I have had a hard time to setup my VPN provider , using this excellent guide from M4DM4NZ
https://forum.opnsense.org/index.php?topic=4979.msg19771#msg19771.

Bug 1)

The problem was that every time I try too do a reboot, my VPN Client connection didn't came up.
On a working system I had these files in /var/etc/openvpn

-rw-------  1 root  wheel  2292 Jul  3 18:07 client1.ca
-rw-------  1 root  wheel  2392 Jul  3 18:07 client1.cert
-rw-------  1 root  wheel   705 Jul  3 18:07 client1.conf
-rw-------  1 root  wheel     3 Jul  3 18:07 client1.interface
-rw-------  1 root  wheel  3322 Jul  3 18:07 client1.key
srwxrwxrwx  1 root  wheel     0 Jul  3 19:09 client1.sock
-rw-------  1 root  wheel   657 Jul  3 16:07 client1.tls-auth
-rw-------  1 root  wheel    12 Jul  3 18:07 client1.up

After a Reboot

-rw-------  1 root  wheel  2292 Jul  4 10:57 client1.ca
-rw-------  1 root  wheel  2392 Jul  4 10:57 client1.cert
-rw-------  1 root  wheel   705 Jul  4 10:57 client1.conf
-rw-------  1 root  wheel     3 Jul  4 10:57 client1.interface
-rw-------  1 root  wheel  3322 Jul  4 10:57 client1.key
srwxrwxrwx  1 root  wheel     0 Jul  4 10:57 client1.sock
-rw-------  1 root  wheel   618 Jul  4 10:57 client1.tls-auth
-rw-------  1 root  wheel    12 Jul  4 10:57 client1.up

The client1.tls-auth got modified, and openvpn is not working anymore.

If I copy the original 657 Bytes back openvpn is working again.

Bug 2)

VPN: OpenVPN: Clients , If I open my Configuration and save it again. It make this
618 Bytes file does not work.

Took me a lot of time to figure out 

4

17.1 Legacy Series / Re: IDS/IPS with virtIO?

« on: June 29, 2017, 05:33:02 am »

Still an issue in 17.1 , tried with Proxmox 4.3.x and i does not work.

E1000 is fine but way too slow..

5

17.1 Legacy Series / Re: Intrusion Detection w/ IPS enabled = nothing works

« on: June 29, 2017, 05:28:44 am »

Same issue on proxmox 4.3.x , but if I change to E1000 it works without any problems.

But E1000 is a CPUHOOG in KVM compared to Virtuo... So it's really a showstopper.

Haven't had any issues with PfSense and virtuo since FreeBsd version 9.1 , so why is the virtuo
driver buggy and broken now

Best Michael.