Messages

1

17.1 Legacy Series / Re: Port Forward Virtual IP

« on: June 17, 2017, 11:32:13 am »

Ok, this is very strange. Port forward to X.X.199.4 works as long as no similar portforward is setup to X.X.199.3

I have portforward to SSH up running. I get correct server when using X.X.199.4 (No portforward is setup on port 22 to X.X.199.3 -> 192.168.12)
Same does not apply with X.X.199.4. Both port 80/443 forwards to X.X.199.3 instead.

For X.X.199.3 I'm using "WAN address" in port forward rule. For X.X.199.4, I'm using "X.X.199.4" in port forward rule. I can't use X.X.199.3 instead of WAN address (seems like that would solve the issue).

Is this a bug or ?

2

17.1 Legacy Series / Port Forward Virtual IP

« on: June 08, 2017, 04:24:06 pm »

I can't get portforward to work with a virtual IP. What am I doing wrong ?

The WAN port is X.X.199.3/24. I have added a virtual IP of X.X.199.4/24

I have port forward from WAN address to internal host and I have port forward from virtual Ip to internal (different) host.
WAN address to 192.168.10.12


Virtual IP to 192.168.10.16


If entering https://X.X.199.4/ host on WAN address (192.168.10.12) is shown, not on virtual IP (192.168.10.16)

Any help appreciated...

3

17.1 Legacy Series / Re: Additional IPs on same WAN interface ?

« on: June 03, 2017, 01:21:49 pm »

Found it!

Firewall: Virtual IPs right ?

4

17.1 Legacy Series / Additional IPs on same WAN interface ?

« on: June 03, 2017, 01:17:09 pm »

Is that possible ? And how to configure.

My WAN port is connected to switch with a /24 range of IP-addresses. I need to configure several public IPs on the WAN interface.

How to do that ?

5

17.1 Legacy Series / Re: How to setup FTP port forward ?

« on: March 06, 2017, 01:38:23 pm »

It seems to work now. Question is though, how do I get FTP TLS to work ?

This is what my client says:

Status:   Connecting to X.X.X.X:21...
Status:   Connection established, waiting for welcome message...
Response:   220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
Response:   220-You are user number 1 of 50 allowed.
Response:   220-Local time is now 13:18. Server port: 21.
Response:   220-This is a private system - No anonymous login
Response:   220-IPv6 connections are also welcome on this server.
Response:   220 You will be disconnected after 15 minutes of inactivity.
Command:   AUTH TLS
Response:   234 AUTH TLS OK.
Status:   Initializing TLS...
Error:   GnuTLS error -110: The TLS connection was non-properly terminated.
Status:   Server did not properly shut down TLS connection
Error:   Could not connect to server

Any help is appreciated :-)

6

17.1 Legacy Series / Re: How to setup FTP port forward ?

« on: March 02, 2017, 11:54:07 pm »

The problem is I don't know how to setup reverse-proxy. Those pictures on the link doesn't look like anything I can find i the interface.
So how do I setup a reverse-proxy for FTP on newest version ?

7

17.1 Legacy Series / How to setup FTP port forward ?

« on: March 01, 2017, 11:49:59 am »

I need to access a FTP server behind the opnsense firewall from the Internet (Reverse FTP proxy ?)

Googling gives me these:
https://forum.opnsense.org/index.php?topic=3956.0
https://forum.opnsense.org/index.php?topic=3868.0

But the don't look at all like my interface. I'm running OPNsense v17.1.2-amd64

Any help appreciated...