Messages

1

17.1 Legacy Series / High Availability

« on: December 12, 2017, 12:35:40 pm »

hello all
In HA scenario,should services be  activate both on master and backup or administrator should activate services in System: High Availability: Status page??
Example:
I set HA for 2 server then i enable IDS.Now when i check System: High Availability: Status page there is an item for IDS with stop status icon.I  check backup server and find out the configuration is sync.
is it a problem in HA or its a duty for administrator to enable or disable service for backup server while master is active.

2

General Discussion / DHCP relay and DHCP server

« on: January 16, 2017, 08:56:55 am »

Hi
I want to enable DHCP relay on wan and use DHCP server on another  interface(there are in separate subnet).
Why doses opnsense avoid to enable DHCP relay or DHCP server for separate interface and subnet ?

3

General Discussion / Re: ZFS

« on: January 16, 2017, 08:49:53 am »

Good news.
Thanks.

4

General Discussion / ZFS

« on: January 14, 2017, 04:10:45 pm »

hi
I think there was a feature in 17.1 road-map and that was  "ZFS rc mount awareness" but now there isn't such a feature.
What was that (ZFS rc mount awareness )  ?

thanks

5

16.7 Legacy Series / Re: Upgrading to 16.7, known issues and workarounds

« on: August 25, 2016, 09:43:53 am »

thanks franco.

IDS and proxy server had problems and both of them are solved.But I didn't understand what the problem was and how it was solved???

6

16.7 Legacy Series / Re: Upgrading to 16.7, known issues and workarounds

« on: August 24, 2016, 03:54:47 pm »

hi
I have  such a problem too.Just in IDS panel.(CSS doesn't load correctly)

7

16.7 Legacy Series / Re: OPNsense UI login problem

« on: August 08, 2016, 06:08:52 am »

Code: [Select]

CSRF check failed. Your form session may have expired, or you may not have cookies enabled.I saw this message too.

8

General Discussion / [SOLVED] build error

« on: May 15, 2016, 08:25:29 am »

hi

This error has been created at make time version 16.1.13.please look at attach file.

make kernel is ok
make base is ok.
make distfiles is ok
make core ....Opps
 

9

Documentation and Translation / Correct the document

« on: May 02, 2016, 10:46:41 am »

hi
I think this command :

Code: [Select]

/usr/local/opnsense/service/execute_command.py /var/run/check_reload_status template reload OPNsense.Sample
should be corrected to

Code: [Select]

./configd_ctl.py template reload OPNsense.Sample
at the document page:
https://docs.opnsense.org/development/backend/templates.html

10

General Discussion / High availability in bridge mode

« on: May 01, 2016, 11:15:54 am »

hi
Is it possible to use high availability in bridge mode?! I mean ,main server and slave are in bridge mode??

11

General Discussion / Re: "make everything" Failed

« on: April 04, 2016, 04:30:07 pm »

please send more information about your problem...but try to use TYPE=opnsense in your make command

12

General Discussion / Option to boot other slice in nano version?

« on: April 04, 2016, 04:25:34 pm »

Hi guys

I'm using the embedded version of opnsense installed on a CF card.
unfortunately, I'm missing it, but is there an option to boot the other slice ?How?

13

Hardware and Performance / Re: Problem with installing nano on SSD

« on: April 03, 2016, 06:29:53 am »

thanks franco

I have tested it as you say with CF(not CFast ) and finally with 99s option ( ) it was installed  successfully on SSD  but I should point out that  i have tested nano version of 15.7.18 ,16.1 and 16.1.8 ( with dd command ) but all of them have faild on SSD (transcend,silicon power and ADATA) or CFast 2.0 (Apacer)

All above version are official releases.
CF is ok and there is no problem with it.(nano version of pfsense is installed successfully on SSD)

Now My question Does this happen to you ??

14

Hardware and Performance / Re: Problem with installing nano on SSD

« on: March 30, 2016, 05:44:54 pm »

it is not booting at all.
I just see a black screen with blinking cursor

15

Hardware and Performance / Re: Problem with installing nano on SSD

« on: March 30, 2016, 03:32:50 pm »

I used your image and also installed it on CF that worked normally.