Messages

Hi Bart,

Thanks for the reply. I've been looking into this further. I tried running the WAN over the build-in network interface (realtek) instead of the dual port Intel and that didn't make any difference. Tried a re-install as well, tried the legacy 21.7 opnsense,... still the same behaviour. I'm starting to wonder if your memory test might indeed reveal something. I'll try to run it as soon as I can. The only thing I don't get is why it would only happen during MS Teams calls?

Niels

Hi all,

First time user of Opnsense. I've got a very simple setup: 1 WAN (Cable connection 300Mbs), 1 LAN on Intel Pro 1000, currently no Vlans. I'm running some tests as I want to use this box for a webfilter, OpenVPN access. Currently never more than 2 clients connected through a Unify AP and I have continious crashes on the system. It just keeps rebooting during Team calls. No straight away, but anywhere between 2-20 minutes in. A simultaneous speed test sometimes triggers it, but not always. I've tried everything I can think off.

The crashes are only during MS Teams videocalls. CPU/mem/disk usage are still very low during this point. No error appears just a sudden reboot like the power was cut. It doesn't seem to get too hot (as far as I can tell).
I tried switching off all hardware accelleration on the interfaces, I played with any setting I could find but nothing seems to help. Any advice on how to fix/diagnose the issue? Thanks in advance.

Current Config:
OPNsense 22.1.10-amd64
FreeBSD 13.0-STABLE
OpenSSL 1.1.1q 5 Jul 2022
On a fujitsu S920 (AMD GX-222GC SOC with Radeon R5E Graphics (2 cores, 2 threads), 4GB ram, 8GB SSD) with a PCI Epxress Intel PRO1000 dual ports.