Messages

Yes it's true. New graphs are awesome. Thanks for all OPNsense team.

Would it be possible to create a forum in Polish language?

the "nc 192.168.14.1 4949" command returns the following response:

Code Select Expand


root@Bravo:~ # nc 192.168.14.1 4949
# munin node at Bravo
list
cpu df df_inode hddtemp_smartctl if_bge0 if_bge1 if_errcoll_bge0 if_errcoll_bge1 if_packets_bge0 if_packets_bge1 iostat load memory netstat ntp_193.219.28.2 ntp_213.199.225.40 ntp_54.37.233.160 ntp_94.23.94.78 ntp_kernel_err ntp_kernel_pll_freq ntp_kernel_pll_off ntp_offset ntp_states open_files smart_ada0 swap systat uptime users

I think that is the correct answer. What is your opinion? 

I still don't know where exactly should I put it :

Code Select Expand


[OPNsense.mydomain.local]
        address 10.0.10.1
        use_node_name yes


/usr/local/etc/munin/munin-node.conf?

Hmm... I installed only os-munin-node plugin. Now I have to install munin deamon/master/collector?
I have described my setup here: https://forum.opnsense.org/index.php?topic=21500.msg101053#msg101053

Can you take a look?

Where You configured this option?

Code Select Expand

[OPNsense.mydomain.local]
        address 10.0.10.1
        use_node_name yes

[munin-node.conf]

I installed os-munin-node plugin.
Configuration on GUI looks like on screen below. However, the statistics in the browser are not generated .
Plugins in /usr/local/etc/munin/plugins are created (screenshot below) using command "munin-node-configure --suggest" and "/usr/local/sbin/munin-node-configure --shell"
What is configured wrong that the statistics are not showing? I am asking for tips, I have been working on this problem all afternoon today.

OPNsense in version 21.1.1

munin-node.conf

Code Select Expand


log_level 4
log_file /var/log/munin/munin-node.log
pid_file /var/run/munin/munin-node.pid
background 1
setsid 1
user root
group wheel
# Regexps for files to ignore
ignore_file [\#~]$
ignore_file DEADJOE$
ignore_file \.bak$
ignore_file %$
ignore_file \.dpkg-(tmp|new|old|dist)$
ignore_file \.rpm(save|new)$
ignore_file \.pod$
ignore_file \.sample$

host_name Bravo
cidr_allow 192.168.14.0/16

host *
port 4949


/var/log/munin-node.log

Code Select Expand


2021/02/13-18:05:13 Munin::Node::Server (type Net::Server::Fork) starting! pid(72790)
Resolved [*]:4949 to [::]:4949, IPv6
Resolved [*]:4949 to [0.0.0.0]:4949, IPv4
Binding to TCP port 4949 on host :: with IPv6
Binding to TCP port 4949 on host 0.0.0.0 with IPv4
Setting gid to "0 0"
2021/02/13-18:06:51 CONNECT TCP Peer: "[192.168.14.20]:56691" Local: "[192.168.14.1]:4949"
2021/02/13-18:06:52 CONNECT TCP Peer: "[192.168.14.20]:56692" Local: "[192.168.14.1]:4949"
2021/02/13-18:07:16 CONNECT TCP Peer: "[192.168.14.20]:56693" Local: "[192.168.14.1]:4949"


Portprobe

Code Select Expand

/usr/bin/nc -w 10 -z  -4 '192.168.14.1' '4949'
Connection to 192.168.14.1 4949 port [tcp/*] succeeded!


I have a 200/20 Mbit bandwidth. I have configured the bandwidth manager according to this manual: https://docs.opnsense.org/manual/how-tos/shaper_share_evenly.html#

Everything works well.
However, I need to limit the bandwidth to 20/5 Mbit for several ip addresses.
For example:
The addresses 192.168.14.20 and 192.168.14.21 receive a bandwidth of 20/2 Mbit/s.
The rest of the addresses in the network (network mask /16) get the full 200/20 bandwidth.
Is this configuration possible?

In the screens below I present my configuration.

I have similar problem to solve. I have a 200/20 Mbit bandwidth. I have configured the bandwidth manager according to this manual: https://docs.opnsense.org/manual/how-tos/shaper_share_evenly.html#

Everything works well.
However, I need to limit the bandwidth to 20/5 Mbit for several ip addresses.
For example:
The addresses 192.168.14.20 and 192.168.14.21 receive a bandwidth of 20/2 Mbit/s.
The rest of the addresses in the network get the full 200/20 bandwidth.
Is this configuration possible?

I currently have the latest version of OPNsense (21.1)

Thank you for your help. Everything rebuilt well. Now I should disconnect one of the disks and check if everything starts up properly :-)

The disk I want to replace is ada1.
Should I install the boot manager on the ada1 disk after rebuilding?

Code Select Expand


root@Lan14:~ # gmirror status
           Name    Status  Components
mirror/OPNsense  COMPLETE  ada0 (ACTIVE)
                           ada1 (ACTIVE)


Code Select Expand


root@Lan14:~ # gmirror list
Geom name: OPNsense
State: COMPLETE
Components: 2
Balance: split
Slice: 4096
Flags: NONE
GenID: 0
SyncID: 1
ID: 584546050
Type: AUTOMATIC
Providers:
1. Name: mirror/OPNsense
   Mediasize: 1000204885504 (932G)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r2w2e6
Consumers:
1. Name: ada0
   Mediasize: 1000204886016 (932G)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r1w1e1
   State: ACTIVE
   Priority: 0
   Flags: DIRTY
   GenID: 0
   SyncID: 1
   ID: 2830495722
2. Name: ada1
   Mediasize: 1000204886016 (932G)
   Sectorsize: 512
   Stripesize: 4096
   Stripeoffset: 0
   Mode: r1w1e1
   State: ACTIVE
   Priority: 1
   Flags: DIRTY
   GenID: 0
   SyncID: 1
   ID: 4007642130


I've installed OPNsense with two disks which are working with raid 1 (GEOM Mirror). One of disks is almost new (hs 5000 hours of work), but second has 49000 hours of work. I'm planing to replace the second drive with a new one.
Can I ask for little help/instructions/tutorial how replace old disk and rebuild disk array (raid 1)?

Of course, I meant the resolution displayed on the monitor connected to the server using the VGA connector. This one looks 640x480 or 800x600 which makes it a bit difficult to observe. Is there any way to get a higher resolution when starting the server?

PS. Greetings from Poland, Nowy Sącz city :-)

Old habits. I can't imagine working without a mc. I would be very grateful if there was any way to restore mc/mc-nox11.

I am still looking for a solution on how to change the resolution in the console to 1024x768 ... I cannot find the appropriate configuration.

PS.
OPNsense made a great impression on me. A piece of good work.

Yesterday I installed OPNsense (21.1) and i'm trying install Midnight Commander. It is posibility to install mc on 21.1?