Messages

1

20.7 Legacy Series / Re: [Solved] Opnsense 20.7.3 and PIA VPN

« on: November 25, 2020, 12:32:10 am »

For me with Don't Pull Routes checked it all works. But I can test it like you suggested

Hi s4rs,

I'm sorry to pester you on this but I wasn't clear on what you did to resolve this issue as a whole. I have the exact same issue as you and tried all matter of things to resolve it but to no luck.

2

20.1 Legacy Series / Errors out on LAN Bridge when using TAP for OpenVPN Server

« on: July 19, 2020, 08:34:38 am »

Hi All,

I'm still relatively new to Opnsense so this may have already been asked. Apologies if it has. Could someone help me pin down the issue?

I have successfully configured a TAP mode OpenVPN server on my build. When a client is connected and browsing the windows shares, things are fine. However, copying an MP4 video over to the desktop, I'm seeing errors out coming through the LAN bridge for the duration of the download. The TAP and WAN have none and there are no errors in on any interface. I'm thinking MTU or MSS issues?

I'm unable to establish what the errors are for. I also note that there is no relative impact on performance with the errors due to the download and upload rate is as expected for my internet connection speed but then again, I don't know how it performs without errors to be certain.

If i delete the TAP interface, the errors out stop. So it is related to that. I've tried changing some of the settings on the server and trying the bridge with different setting, I've set the tunables as instructed so the bridge allows filtering and none of this helps. I've also mucked around with MTU and MSS to see if that affects things.

Normally I'd expect errors due to failing hardware but since it relates to the TAP interface, I don't think there is a hardware issue.

3

20.1 Legacy Series / Re: Traffic Shaper Issues

« on: April 30, 2020, 11:48:52 pm »

And the answer is, delete your rules, queues and pipes and start again. Fixed the problem fine.

4

20.1 Legacy Series / Traffic Shaper Issues

« on: April 30, 2020, 01:13:48 am »

Hi There,

I'm new to the forum so apologies if this is a known issue.

I've just upgraded to 20.1.5 and notice the traffic shaper no longer shaping HTTPS traffic.

The reason it became apparent what when I noticed a hefty download (40GB) not registering in the summary as being shaped traffic. On checking the data, it is TCP HTTPS traffic.

I tried a speed test in the line and that is showing that the traffic passed there is not being restricted by my pipe, ie. My down pipe is 40mb/s and the max line speed is 50mb/s, the speed test is running at 50.

I've checked all the rules and reset them and it still doesn't work. Any ideas? It worked perfectly fine on the previous builds.

Cheers in advance for any support you might be able to give.