Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - webdb

#1
Hi
I have a 1Gig connection and OPNsense works perfectly fine with IPS enabled (approx 3k rules). But when I download big files from Usenet (e.g. 5-10 gig) the performance goes from 900Mbps down to a few Kbps and up again. This isn't really an issue for me as I have no time constraints for such downloads. However teh firewall/DNS seems to freez as my 60 devices can't connect to the internet after such a download and I always have to restart Opnsense.
When I turn on my old Kerio Control and do the same scenario I see drops to approx 50mbps and the firewall doesn't freeze.

Has anyone similar issues and found a solution? I love Opnsense and don't want to go back to Kerio again or switch to another product such as Zyxel ATP 200

Thanks
Daniel

Hardware: Initel Core i7, 16GB Memory, SSD, only Dyndns and IPS running on Opnsense
#2
20.7 Legacy Series / Re: IOT Network
August 23, 2020, 07:00:54 PM
Thanks Bart
#3
20.7 Legacy Series / IOT Network
August 23, 2020, 04:06:11 PM
Hi

I'd like to create an IOT Network and have created a new interface with VLAN ID 100. Has anyone a simple description of the rukel I need to create in Firlewall->Rules->IOT to ensure IOT devices can access the internet but not my LAN?

Many thanks
Daniel
#4
that was the solution, diabled it and it worked. MANY THANKS, made my day !!
Best regards
Daniel
#5
Hi
I switched from pfSense to OPNSense and all is working fine such as OpenVPM Access from external, Port Forward to my Webserver and also my 50 ish static DHCP clients can access the internet.
But unfortunately only static DHCP clients have internet access, dynamic clients get an IP Address, default GW, DNS and they can access any device in my LAN but they have no internet access.

My setup
LAN: 192.168.1.0/24
OPNSense: 192.168.1.254

Static and dynamic clients get the same back from the DHCP Server
IP Address: either dynamic or static
DNS: 8.8.8.8 and 8.8.4.4
Default GW: 192.168.1.254
Outbound NAT is set to automatic

So again dynamic clients can ping any IP device in my LAN but not the firewall (192.168.1.254) whereas static clients can also ping the firewall

Any idea? I'm sure it's a small setting somewhere

Regards
Daniel