Messages

Ok, i've troubleshoot the problem and found that:

1. disabled captive portal
2. removed captiveportal sqlite database
3. enable captive portal

this create a new one captive portal DB with the zone number structure.
Now portal works great, but not for HTTPS sites.

There is a way to redirect the https traffics through captive portal?
Otherwise, there is a way to open the captive portal in other Windows, then forward to another page in the browser?

Thank you very much.

Hi, here some information:

OPNSENSE LAB
LAN em1 192.168.56.254/24
WAN em0 DHCP: 10.0.2.15/24
VLAN12 em2 192.168.112.254/24

Windows 10 VM
LAN DHCP on VLAN12 (em2)

Attached you can see the rules set on the VLAN12.

Without Captive Portal i can browse all sites, and when i create new one CP authentication failed.

Thanks for reply.
Now i cannot check because i'm in vacation. Next monday i can send you all information. But yes, without Captive Portal, all works great!

Hi,
i've search in the Forum bat i didn't found a solution for my problem.

The first time that i set up the Captive Portal with the local database, the Portal it worked but I couldn't log in, return authentication failed. Than, I have setup again, also with Voucher, but now the portal is no longer displayed and the session time out. Can you help me to solve this issue?

I've tested this configuration in a VM on VirtualBox, and also on the Miniserver SMALL3 HW.

Thank you

Hi,
i've some problem with Captive Portal.
The first time that i set up, with the local database, the Portal works but I couldn't log in, return authentication failed. Than, I have setup again, also with Voucher, but now the portal is no longer displayed and the session time out. Can you help me to solve this issue?

I've tested this configuration in a VM on VirtualBox, and also on the Miniserver SMALL3 HW.

Thank you

Ciao,
per poterti aiutare servirebbero le schermate delle macchine virtuali e le configurazioni IP di entrambe le VM. Il mio consiglio è quello di creare un'interfaccia WAN (se non già presente) su OPNSense ed abilitare il DHCP, così che il tuo Ubuntu prenda in automatico le configurazioni dall'appliance.

Saluti