1
23.1 Legacy Series / Settings lost on Reboot
« on: April 12, 2023, 06:38:28 pm »
Here goes: Installed from 22.7 media I made a while back, was the DVD Media, installed upgrades it went to 23.1. Ran it for about a week, until I got a break to do some in depth setup, decided to upgrade. The upgrade shows 23.1.5. It seemed to installed however on reboot, my configuration changes were gone and it seemes to be back to 23.1.
Per advice elsewhere, I started a new install, selecting to delete the partitions during setup. Not quite sure if it did that, and installed, but noticed that my prior adapter names showed up, so I wasn't certain it was clean install. Built new media using the 23.1 vga, deleted the partitions and then booted up on the new media.
Install seems to work, confirmed I did the login as installer. However, I am having the same problem, when I try to upgrade to 23.1.5, it goes through the motion, and reboots only to return with 23.1 and without any configurations.
Look around online but only found a few people with similar issues. I decided to try a few things. Disabled ip6, made sure that my dns was only using 3rd part not and isp dns and verified it through /etc/resolv.conf.
Did a reinstall of several packages via the package menu, things like opnsense-update. opnsense-installer, anything ssl related. I can even go to my status tab and it say 23.1.5.
Ran an option 12 update from SSH, everything appears to update, however upon reboot I see this:
Am I somehow running a live instance even through it doesn't say so?
Its not booting of my usb, its booting off the instance I got after I logged in as installer.
The other odd thing is despite it showing all the old information, if I run an audit, it knows it should have been updated, and is looking for the updated files.
Per advice elsewhere, I started a new install, selecting to delete the partitions during setup. Not quite sure if it did that, and installed, but noticed that my prior adapter names showed up, so I wasn't certain it was clean install. Built new media using the 23.1 vga, deleted the partitions and then booted up on the new media.
Install seems to work, confirmed I did the login as installer. However, I am having the same problem, when I try to upgrade to 23.1.5, it goes through the motion, and reboots only to return with 23.1 and without any configurations.
Look around online but only found a few people with similar issues. I decided to try a few things. Disabled ip6, made sure that my dns was only using 3rd part not and isp dns and verified it through /etc/resolv.conf.
Did a reinstall of several packages via the package menu, things like opnsense-update. opnsense-installer, anything ssl related. I can even go to my status tab and it say 23.1.5.
Ran an option 12 update from SSH, everything appears to update, however upon reboot I see this:
Code: [Select]
Last login: Sat Apr 8 02:17:41 2023 from 192.168.1.21
----------------------------------------------
| Hello, this is OPNsense 23.1 | @@@@@@@@@@@@@@@
| | @@@@ @@@@
| Website: https://opnsense.org/ | @@@\\\ ///@@@
| Handbook: https://docs.opnsense.org/ | )))))))) ((((((((
| Forums: https://forum.opnsense.org/ | @@@/// \\\@@@
| Code: https://github.com/opnsense | @@@@ @@@@
| Twitter: https://twitter.com/opnsense | @@@@@@@@@@@@@@@
----------------------------------------------
*** OPNsense.localdomain: OPNsense 23.1 ***
Am I somehow running a live instance even through it doesn't say so?
Its not booting of my usb, its booting off the instance I got after I logged in as installer.
The other odd thing is despite it showing all the old information, if I run an audit, it knows it should have been updated, and is looking for the updated files.
Code: [Select]
***GOT REQUEST TO AUDIT HEALTH***
Currently running OPNsense 23.1 at Wed Apr 12 16:31:07 UTC 2023
>>> Check installed kernel version
Version 23.1 is correct.
>>> Check for missing or altered kernel files
No problems detected.
>>> Check installed base version
Version 23.1 is correct.
>>> Check for missing or altered base files
No problems detected.
>>> Check installed repositories
OPNsense
>>> Check installed plugins
No plugins found.
>>> Check locked packages
No locks found.
>>> Check for missing package dependencies
Checking all packages: .......... done
>>> Check for missing or altered package files
Checking all packages: .......... done
>>> Check for core packages consistency
Core package "opnsense" has 66 dependencies to check.
Checking packages: ..
ca_root_nss-3.87 version mismatch, expected 3.89
Checking packages: ....
dnsmasq-2.88_1,1 version mismatch, expected 2.89_1,1
Checking packages: .
dpinger-3.2 version mismatch, expected 3.3
Checking packages: ..
filterlog-0.6 version mismatch, expected 0.7
Checking packages: ........
lighttpd-1.4.67 version mismatch, expected 1.4.69
Checking packages: .
monit-5.32.0 version mismatch, expected 5.33.0
Checking packages: ...
openssh-portable-8.9.p1_4,1 version mismatch, expected 9.2.p1,1
Checking packages: .
openssl-1.1.1s,1 version mismatch, expected 1.1.1t_1,1
Checking packages: ..
opnsense-23.1 version mismatch, expected 23.1.5_4
Checking packages: ...
opnsense-update-23.1 version mismatch, expected 23.1.5
Checking packages: ...
php81-ctype-8.1.14 version mismatch, expected 8.1.17
Checking packages: .
php81-curl-8.1.14 version mismatch, expected 8.1.17
Checking packages: .
php81-dom-8.1.14 version mismatch, expected 8.1.17
Checking packages: .
php81-filter-8.1.14 version mismatch, expected 8.1.17
Checking packages: .
php81-gettext-8.1.14 version mismatch, expected 8.1.17
Checking packages: ..
php81-ldap-8.1.14 version mismatch, expected 8.1.17
Checking packages: .
php81-pdo-8.1.14 version mismatch, expected 8.1.17
Checking packages: ..
php81-phalcon-5.1.4 version mismatch, expected 5.2.1
Checking packages: .
php81-phpseclib-3.0.18 version mismatch, expected 3.0.19
Checking packages: .
php81-session-8.1.14 version mismatch, expected 8.1.17
Checking packages: .
php81-simplexml-8.1.14 version mismatch, expected 8.1.17
Checking packages: .
php81-sockets-8.1.14 version mismatch, expected 8.1.17
Checking packages: .
php81-sqlite3-8.1.14 version mismatch, expected 8.1.17
Checking packages: .
php81-xml-8.1.14 version mismatch, expected 8.1.17
Checking packages: .
php81-zlib-8.1.14 version mismatch, expected 8.1.17
Checking packages: .
pkg-1.18.4 version mismatch, expected 1.19.1_1
Checking packages: .....
py39-numpy-1.23.5_1,1 version mismatch, expected 1.24.1,1
Checking packages: .
py39-pandas-1.5.1,1 version mismatch, expected 1.5.3,1
Checking packages: .
py39-requests-2.28.1_1 version mismatch, expected 2.28.2
Checking packages: ..
py39-ujson-5.0.0 version mismatch, expected 5.7.0
Checking packages: .
py39-vici-5.9.9 version mismatch, expected 5.9.10
Checking packages: .
radvd-2.19_1 version mismatch, expected 2.19_2
Checking packages: ...
squid-5.7 version mismatch, expected 5.8
Checking packages: .
strongswan-5.9.9_1 version mismatch, expected 5.9.10_1
Checking packages: .
sudo-1.9.12p2 version mismatch, expected 1.9.13p3
Checking packages: ...
unbound-1.17.1_1 version mismatch, expected 1.17.1_2
Checking packages: .. done
***DONE***