1
General Discussion / Feature Requests
« on: February 17, 2023, 02:36:09 am »
Is there a place to submit ideas? 
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Hardware and Performance / How to Access NVME storage drive contents via Appliance/FREEBSD
« on: February 17, 2023, 02:29:05 am »
Hey all,
This might be a really stupid question but...
I installed OPNSense on a NVME drive on my appliance. I had also tried to installed PFSSense, but did not have success with it, so would like to uninstall it and keep OPNSense.
How can I access the contents on the drive without running another OS the appliance with some type of file explorer utility? Can this be done via FREEBSD (that's the underlying OS behind OPENSense, as I understand it?)
My goal is to just have OPNSense on it; nothing else unnecessary on the drive.
Is there some command prompt magic (seeking specific syntax) from the console I can use to see what's there and delete what I don't want? I think it might be organized into partitions?
I am NOT good with syntax, so hoping you can show me what I need to copy paste to get this done.
(pllleeaassse)
Thanks!
This might be a really stupid question but...
I installed OPNSense on a NVME drive on my appliance. I had also tried to installed PFSSense, but did not have success with it, so would like to uninstall it and keep OPNSense.
How can I access the contents on the drive without running another OS the appliance with some type of file explorer utility? Can this be done via FREEBSD (that's the underlying OS behind OPENSense, as I understand it?)
My goal is to just have OPNSense on it; nothing else unnecessary on the drive.
Is there some command prompt magic (seeking specific syntax) from the console I can use to see what's there and delete what I don't want? I think it might be organized into partitions?
I am NOT good with syntax, so hoping you can show me what I need to copy paste to get this done.
(pllleeaassse)Thanks!
3
Hardware and Performance / Cant find Switch on OPNSense
« on: February 15, 2023, 08:47:41 pm »
Hey guys,
I have OPNSense router firewall as 192.168.1.1. Latest build installed today at 12:30PM MST. (note this issue below was happening with the prior build as well, so don't think this is related to the new build)
I bought a new TP-LINK TL-SG3210XHP-M2 switch, and before connecting it to OPNSense, configured its IP to a static IP of 192.168.1.20, so it would not get its IP from DHCP. I was able to connect to it fine from a laptop, login to the admin GUI, etc.
Once I connected it to OPNSense, I was no longer able to log into it at that IP. The device isn't being found.
However, all of the clients connected to the switch are getting internet just fine. Traffic is moving through the switch.
Is there a setting in OPNSense I need to change to be able to access the switch?
Thanks!
I have OPNSense router firewall as 192.168.1.1. Latest build installed today at 12:30PM MST. (note this issue below was happening with the prior build as well, so don't think this is related to the new build)
I bought a new TP-LINK TL-SG3210XHP-M2 switch, and before connecting it to OPNSense, configured its IP to a static IP of 192.168.1.20, so it would not get its IP from DHCP. I was able to connect to it fine from a laptop, login to the admin GUI, etc.
Once I connected it to OPNSense, I was no longer able to log into it at that IP. The device isn't being found.
However, all of the clients connected to the switch are getting internet just fine. Traffic is moving through the switch.
Is there a setting in OPNSense I need to change to be able to access the switch?
Thanks!
4
Hardware and Performance / Open DNS Servers
« on: February 14, 2023, 02:42:22 am »
Hey guys,
On this page, this is where I can change the DNS servers I want to use at the OPNSense router level yes?
What do the "Use Gateway" settings do? Do I need to select something here to use the IPs I pasted?
See attached
Thanks!
On this page, this is where I can change the DNS servers I want to use at the OPNSense router level yes?
What do the "Use Gateway" settings do? Do I need to select something here to use the IPs I pasted?
See attached
Thanks!
5
Hardware and Performance / OPNSense Security Certificate
« on: February 14, 2023, 01:51:19 am »
Hi All,
When I try to navigate to the admin site I get the attached error and have to accept the risks before being able to login an open it. Any ideas?
When I try to navigate to the admin site I get the attached error and have to accept the risks before being able to login an open it. Any ideas?
6
Hardware and Performance / Help with Console Log Messages
« on: February 13, 2023, 08:24:53 pm »
Hey guys,
Been having intermittent connectivity issues with my main desktop PC connected to my OPNSense router.
Here is a sccreenshot of some of the activity I am seeing in the log on console. Any ideas of what this means?
My Main PC is 192.168.1.169 which I have set to a static IP on the same subnet.
Interface ICG1 is assigned to my LAN (ICG0 is assigned to my WAN)
Thanks!
Been having intermittent connectivity issues with my main desktop PC connected to my OPNSense router.
Here is a sccreenshot of some of the activity I am seeing in the log on console. Any ideas of what this means?
My Main PC is 192.168.1.169 which I have set to a static IP on the same subnet.
Interface ICG1 is assigned to my LAN (ICG0 is assigned to my WAN)
Thanks!
Pages: [1]