1
24.1 Production Series / Re: OpnSense doesn't have internet with Proxmox
« on: April 24, 2024, 12:56:21 pm »
I have a somewhat similar setup.
Proxmox hardware: This has 4 physical ports:
Port1, Port 2, Port 3, Port 4
I have configured it as follows:
Port 1: WAN
Port 2: LAN
Port 4: Management
In proxmox, created the following bridges:
vmbr0: Port 1 (physical WAN port)
vmbr1: Port 2 (physical LAN port)
vmbr2: Port 4 (physical management port)
Address assignments as in screenshot.
Then installed OPNsense GUO using vmbr0 as WAN, vmbr1 as LAN.
OPNsense comes up with router address: 192.168.1.1
in OPNsense, on DHCP, assign a static IP address (192.168.1.254) to Proxmox using its Mac address.
You should now be able to connect to Proxmox GUI using 192.168.1.254 IP address...
OPNsense GUI will be available at 192.168.1.1
Proxmox hardware: This has 4 physical ports:
Port1, Port 2, Port 3, Port 4
I have configured it as follows:
Port 1: WAN
Port 2: LAN
Port 4: Management
In proxmox, created the following bridges:
vmbr0: Port 1 (physical WAN port)
vmbr1: Port 2 (physical LAN port)
vmbr2: Port 4 (physical management port)
Address assignments as in screenshot.
Then installed OPNsense GUO using vmbr0 as WAN, vmbr1 as LAN.
OPNsense comes up with router address: 192.168.1.1
in OPNsense, on DHCP, assign a static IP address (192.168.1.254) to Proxmox using its Mac address.
You should now be able to connect to Proxmox GUI using 192.168.1.254 IP address...
OPNsense GUI will be available at 192.168.1.1