OPNsense Forum
Archive => 18.7 Legacy Series => Topic started by: elberton on September 21, 2018, 06:53:56 am
-
Hello.
I have 2 opnsense firewall on 2 site differents with the same configuration.
8 Go memory. 60 Go Hard Drive
intel pentium dualcore
Opnsense 18.7.3
Squid i-icap clamd
After about 1 or 2 day all the memory is used. And causing crash of squid. I need to reboot them. I have proceded to the upgrade the last day to the 18.7.3 but the problem still present.
I have activate swap option. But in the log i see no swap disk available when squid crashing.
And the problem is on the 2 opnsense firewall.
if i desactivate i-icap and clamd squid crash about 2 day.....
I don't know where to find the problem. And i need squid and blacklist for the school...
thank's for your help
-
I can confirm the same that the swap is not getting used in the dashboard. No crashes for me. I upgraded about 12 hours ago to 18.7.3.
Mem util - 15%
CPU below 5%
128 GB SSD; 8 GB RAM, 8 GB SWAP.
root@OPNsense:~ # swapinfo
Device 1K-blocks Used Avail Capacity
/dev/gpt/swapfs 8388608 0 8388608 0%
root@OPNsense:~ # cat /etc/fstab
# Device Mountpoint FStype Options Dump Pass#
/dev/gpt/rootfs / ufs rw 1 1
/dev/gpt/swapfs none swap sw 0 0
root@OPNsense:~ #
-
crash last 10 min :
Sep 21 08:10:02 squid[38575]: Squid Parent: (squid-1) process 38869 started
Sep 21 08:10:02 squid[38575]: Squid Parent: will start 1 kids
Sep 21 08:07:15 squid[70037]: Squid Parent: (squid-1) process 70502 exited due to signal 6 with status 0
Sep 21 08:07:14 kernel: pid 70502 (squid), uid 100: exited on signal 6 (core dumped)