OPNsense Forum

Archive => 18.7 Legacy Series => Topic started by: heinzelrumpel on September 19, 2018, 08:39:16 am

Title: [SOLVED] Portforwarding WAN->HTTPS blocked by default deny rule
Post by: heinzelrumpel on September 19, 2018, 08:39:16 am
Hi,

I trying to set a Port Forwarding on WAN to internal Server with Protocol HTTPS on Port 443. I followed the steps found in a thread from this forum https://forum.opnsense.org/index.php?topic=6155.0 (https://forum.opnsense.org/index.php?topic=6155.0)

Unfortunately the requests are blocked by the firewall.

One thing that confuses me a little bit is the fact, that in the link above there was described to set "Destination" to "WAN Addresses" . In other tutorial I found, that this has to be set to the corresponding internal Webserver. But still, neither way works. I have set true nat enabled, as said in the original posting. But wherever I look, everything seems to look fine with NAT and corresponding Firewall rule. I have no clue what is going wrong.

Regards, heinzelrumpel

Title: Re: Portforwarding WAN->HTTPS blocked by default deny rule
Post by: Evil_Sense on September 19, 2018, 10:54:46 pm
The configuration like on your pictures is the right one (destination should be wan address).
But you have to let the source port on 'any' (because the source port is mostly random (like the help text should state)).
Title: Re: Portforwarding WAN->HTTPS blocked by default deny rule
Post by: heinzelrumpel on September 20, 2018, 10:26:15 am
Thanks. It works now.
Title: Re: Portforwarding WAN->HTTPS blocked by default deny rule
Post by: Evil_Sense on September 20, 2018, 11:01:05 am
You're welcome :)

Please prepend '[SOLVED]' to the thread title.