OPNsense Forum
Archive => 18.7 Legacy Series => Topic started by: R@sM!ke on August 28, 2018, 06:15:57 am
-
Reading up the forums and Googling for how to do this comes up with nothing much that actually works.
I found this article that says the instructions were removed but nothing replaced it (https://forum.opnsense.org/index.php?topic=3521.0 (https://forum.opnsense.org/index.php?topic=3521.0)).
I then found this which got me to get PnP working but NAT is still showing Strict no matter what I do. Please help, I will put together a proper tutorial if we can figure this out so others can have access to it and work on keeping it updated.
So far this is what I got...
Static IP for Xbox
Installed os-upnp
In UPnP and Nat-PMP Settings I have the following:- Enabled
- Allow UPnP Port Mapping
- Allow NAT-PMP Port Mapping
- External Interface - WAN
- Interfaces (generally LAN) - LAN
- Set 1 [allow 0-65535 000.000.000.000/32 0-65535]
Under NAT -> Outbound I have the following:
- Source Address - Single Host or network - 000.000.000.000" & "Static Port - Checked"
This what it shows for versions:
OPNsense 18.7.1_3-amd64
FreeBSD 11.1-RELEASE-p12
OpenSSL 1.0.2o 27 Mar 2018
I changed my IPs to 0's ... Any help here will be greatly appreciated.
-
I have NAT Rule of my LAN network:
192.168.1.0/24 with a Static NAT out
My UPNP is configured as yours is with WAN / LAN.
If you rebooted your XBox, you should see status in Services->UPNP->Status
Can you share screenshots of what you have setup ?
-
Animosity022,
Thanks for the reply.
Sorry, out of town for a conference but will post screenshots as soon as I get back.