OPNsense Forum

Archive => 18.7 Legacy Series => Topic started by: eck on August 21, 2018, 04:21:37 pm

Title: opnsense 18.7x hangs on db. prompt after reboot
Post by: eck on August 21, 2018, 04:21:37 pm

Hello,

After the upgrade to 18.7 the system hangs on db. prompt upgrade to version 18.7.1_3 didn't fix the problem.
After several reset or reboots the system runs again.

What to do to fix this ?

See attachments

Title: Re: opnsense 18.7x hangs on db. prompt after reboot
Post by: eck on September 10, 2018, 01:26:02 pm

Please give me a hint to solve this problem.

Title: Re: opnsense 18.7x hangs on db. prompt after reboot
Post by: franco on September 10, 2018, 01:45:49 pm

Does this boot sometimes and sometimes not? There is nothing known that would fix this... it seems to be related to the VGA device in some way, maybe a serial-only setup works better if that is possible in your host configuration.


Cheers,
Franco

Title: Re: opnsense 18.7x hangs on db. prompt after reboot
Post by: eck on September 10, 2018, 02:12:49 pm

thanks for the replay.

Yes sometimes it boots most of the times it hangs on the debug window. when the system is stuck into a debug window a reboot or sometimes more are needed to get any further.
Opnsense seem when booted to run without any problems.

The system is running on vmware esxi 6.5

I have more Opnsense in the same VM configuration on the same VM server running (whiteout this problem)

Maybe I have to tweak the default VM graphic options to overcome this problem.