OPNsense Forum

Archive => 18.7 Legacy Series => Topic started by: shtech on August 20, 2018, 08:54:46 pm

Title: Ports being blocked, but should be open
Post by: shtech on August 20, 2018, 08:54:46 pm

Suddenly this morning, after a reboot RTP ports were being blocked.
PBX is inside lan. Port forwards and wan rules were working this morning.

I had added LAN rules to block everything from the PBX system except 5060, 16384-32768, 5080, and 443 inside the lan only. I applied these rules but later deleted. I then restarted the firewall sometime after that. When it came back up, no sound on phones. It will ring out to external numbers, but no sound. Internally calls work.

I can use a cloud port check and 5060 is Open. However, the RTP ports listed above show blocked.

Nothing in the live view of the log. FusionPBX system. Anyone got an idea? I'm out of them.

Title: Re: Ports being blocked, but should be open
Post by: shtech on August 20, 2018, 10:23:06 pm

rebuilt the rules and it working now. Which is really odd. I removed the rules that were there, recreated them exactly. It started working.