OPNsense Forum

Archive => 18.1 Legacy Series => Topic started by: GOCE on July 08, 2018, 09:09:42 pm

Title: QoS on LTE (4G)
Post by: GOCE on July 08, 2018, 09:09:42 pm

Hi,

I have an OPNsense firewall behind a LTE router with no real constant speed. It can be between 20-50 MBit depending on weekday and daytime. I would like to do some traffic shaping on the WAN interface but how should I configure the Pipes if there is no absolute bandwith for uploads and downloads?

Regards, GOCE

Title: Re: QoS on LTE (4G)
Post by: mimugmail on July 08, 2018, 11:06:22 pm

The best is a Pipe with WFQ and CoDel, multiple Queues with good Weighting. Speed around 40mbit. Then you should geht fair values, also with only 20 Mbit.