OPNsense Forum

Archive => 18.1 Legacy Series => Topic started by: rocketme on June 23, 2018, 05:08:40 am

Title: About save configuration
Post by: rocketme on June 23, 2018, 05:08:40 am
Hi all,I am a user from China. And my English is poor,so I will use English and Chinese to describe my problems.
:)
After I delete the Lan interface(I didn't save), I can't visit the GUI. And then I restart OPNsense,because I thought it would read the last configuration like CISCO did not save what I did. But I found that the Lan interface had been deleted when I access through the console.
It doesn't matter what I had done,and I can config it again.
What I want to express is that DO NOT SAVE anything before  administrator save the configuration.In the production environment, automatic storage will cause many problems because of the inability to recover quickly!

我在删除LAN接口之后(并没有保存),不能访问GUI界面。然后我重启OPNsense,因为我以为它会跟思科一样读取最后一个配置而不会保存我所做的操作。但是当我访问控制台时发现LAN接口已经被删除了。
这些并不重要,我会重新配置它。
但是我想表达的是,在管理员确定保存所做操作之前,不要自动保存。在生产环境中,自动保存会产生很多问题,原因在于无法快速恢复!