OPNsense Forum

Archive => 18.1 Legacy Series => Topic started by: Ralf Kirmis on June 22, 2018, 04:40:51 pm

Title: Problem with Ping
Post by: Ralf Kirmis on June 22, 2018, 04:40:51 pm

Hi,
i've a problem with ping from the opnsense via ipsec on version 18.1.10
I've setup an ipsec tunnel to an remote destination.
The tunnel comes up, and i can ping the devices on the other side of the vpn tunnel.
But if i ping with the source lan addresse from the opnsense Gateway i get no response from the other side.
Also the command ping_hosts.sh on the shell runs into an timeout.
What i'am doing wrong?

kindly regards,
Ralf

Title: Re: Problem with Ping
Post by: camouflageX on June 29, 2018, 08:47:04 am

Hello Ralf,

it's the same for me. I can't send pings from my OPNsense device to the other side of the IPsec tunnel either.

If you do a traceroute you will see that the packets go to WAN, right?

Title: Re: Problem with Ping
Post by: Ralf Kirmis on June 29, 2018, 10:14:33 am

Hi,

as a quick workaround i have a new floating firewall rule with ICMP any any defined.
Now the ping ist ok.

regards,
Ralf