OPNsense Forum

Archive => 18.1 Legacy Series => Topic started by: sedace on May 11, 2018, 06:09:29 pm

Title: IPSEC VPN documentation issue...
Post by: sedace on May 11, 2018, 06:09:29 pm

Hi All,

Finally getting around to trying out a VPN setup, and for my needs IPSEC is what I wanted to use.  Following the guide https://wiki.opnsense.org/manual/how-tos/ipsec-road.html (https://wiki.opnsense.org/manual/how-tos/ipsec-road.html) when I get to the Phase-2 section it suggests setting the PFS Key Group to "Off" however, there is no "off" option available in my screen.  (Under VPN \ IPSEC \ Tunnel Settings \ Phase 2). 

I triple checked the other settings were all matching and I'm not sure if that value is going to affect the final results yet, but figured if I'm not doing something wrong I'd post here for documentation update awareness? 

Thoughts?

Title: Re: IPSEC VPN documentation issue...
Post by: franco on May 14, 2018, 10:59:44 am

Sorry, will be fixed in 18.1.8 with https://github.com/opnsense/core/commit/aee843e10

you can apply the patch via:

# opnsense-patch aee843e10


Cheers,
Franco