OPNsense Forum
English Forums => General Discussion => Topic started by: hypemedia on April 29, 2018, 10:12:44 pm
-
I am trying to setup an filtering bridge following this guide: https://wiki.opnsense.org/manual/how-tos/transparent_bridge.html?highlight=transparent
If i put the ip on the bridge interface nothing works. If I put the ip on the wan interface I can get to the GUi but not to the ip of the server behind the bridge (WAN, LAN).
Not sure why is not working as on an other vmware machine I have the same setup and it works.
I have public IP on the wan and on the servers connected to the bridge.
Any ideas what I am doing wrong?