OPNsense Forum

English Forums => Web Proxy Filtering and Caching => Topic started by: Andiii on April 03, 2018, 09:20:37 am

Title: Captive Portal didn’t work for remote Networks
Post by: Andiii on April 03, 2018, 09:20:37 am

Hello all

I have a fresh install of OpenSense Version 1.8.1.4 and we would like to give our guest internet access from all our company location.
But we need a splash page to accept our AGBs.
We have different location and on each location we have a WLAN SSID with a separated Network.
This Network did we routing to our Datacenter and there we have install the OpenSense Proxy and a separated DNS and DHCP.

The Proxy Server is only for free internet to our guests.
The Traffic from our LAN-Network is separated and has his own Firewall, so that can’t reach the Proxy. The WLAN Network Use VPN Tunnels to reach the Datacenter (provided by our Firewall).

So if I setup the Captive Portal according your documentation, it didn’t work.
If I deactivate the the Rule to "Deny Traffic" direct to the Proxy then I get Internet Access but without “Splash Page”.
The Inside Interface on the Proxy has 10.4.4.4 so if I put a Device in this Network and test it, the “Splash Page” will work, still with active Deny Rule.
But if we came from the remote Network 10.16.0.0 over the LAN-Port 10.4.4.4 then it didn’t work.

Please help us, because at the moment we can’t use OpenSense and cant provide free Internet without the “Splash Page”

Thank you very much.

Title: Re: Captive Portal didn’t work for remote Networks
Post by: Andiii on April 12, 2018, 03:27:09 pm

Can nobody help use ?  :'(