OPNsense Forum
English Forums => Tutorials and FAQs => Topic started by: moumou85 on April 01, 2018, 10:18:49 am
-
Hi,
trying to setup my opnsense as a wifi client to add a failover wan interface. My wifi card is detected (ral0_wlan1) but opnsense only propose me to choose between ad hoc, infrastructure or AP mode. Don't know how to choose a client mode ???.
Can you please help me ?
-
You were able to configure the ral0 device as a wireless interface, because I have the same problem and apparently opnsense won't let you configure as wifi
-
Hi,
i also tried to setup OPNsense as wifi client.
I found this for pfsense: https://docs.netgate.com/pfsense/en/latest/book/wireless/wireless-wan.html
But i don't get it to work on OPNsense right now. I can see the wireless networks (ssid) in my neighbourhood into OPNsense gui. But how i geht teh connection to my favorite wifi network!?
best regards
Dirk
-
Assing the wifi to WAN, go to the WAN Interface, choose your SSID and enter the password. Working here for years... :-)
-
Assing the wifi to WAN, go to the WAN Interface, choose your SSID and enter the password. Working here for years... :-)
I only get a connection into a open wifi network. :( As soon as i enable encryption at the AP i can't get a connection anymore. It is equal if the encryption set to WPA or WPA2.
-
Might be worth mentioning that you try that on an inofficial Raspi 3 ARM image
https://forum.opnsense.org/index.php?topic=14875.msg68561#msg68561
:-D
-
did you see this goodie?
https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=254640&sid=5d8fc35046ab7ea55bf9d3d67e4847d2
-
Might be worth mentioning that you try that on an inofficial Raspi 3 ARM image
Yes, you're right! ::)
I'll do the same with x86 hw and supported image until the next days. I'll use the same ralink wifi stick for testing. We'll see if this a problem of the arm image.