OPNsense Forum

English Forums => General Discussion => Topic started by: Maxime Rey on March 20, 2018, 04:52:24 pm

Title: Trouble with pfsync setup (netmask/32)
Post by: Maxime Rey on March 20, 2018, 04:52:24 pm

Hi,
I'm testing OPNSense to replace my actual firewalls (not the one connected to the internet but between my public network and internals networks).

I have some trouble with pfsync setup.

Master interfaces configuration :

WAN : 84.XX.YY.ZZ/26

LAN : 172.16.10.110/24 (GUI access)

INTERCONNECTION : 10.0.0.1/16

 I configured Carp and PFsync on my master and created one interface on both firewall for the interconnection.
And after the reboot (mandatory to enable the config), I lost my GUI access and the INTERCONNECTION interface disappeared. Moreover the LAN netmask change from /24 to /32.

I tried to reconfigure the LAN interface using the OPNsense CLI but the netmask is always ignore  .

Start

(https://image.noelshack.com/minis/2018/12/2/1521560619-cli.png) (https://www.noelshack.com/2018-12-2-1521560619-cli.png)

Config

(https://image.noelshack.com/minis/2018/12/2/1521560840-end.png) (https://www.noelshack.com/2018-12-2-1521560840-end.png)

End

(https://image.noelshack.com/minis/2018/12/2/1521561051-endd.png) (https://www.noelshack.com/2018-12-2-1521561051-endd.png)

PS : No IP problem with my slave firewall

Any idea ?  ???