OPNsense Forum

Archive => 18.1 Legacy Series => Topic started by: JodyTek on March 08, 2018, 05:47:32 pm

Title: access port forward web sever from internal lan
Post by: JodyTek on March 08, 2018, 05:47:32 pm
Hi All,

New to opnsense and having a time figuring out how to access my web server internally on network. Here is my setup in a nutshell.

I am running latest stable opnsense. I have created port forward for both port 80 and 443 that redirects to local ip of my web server. I am using google dynamic dns to point my domain name to my public IP. This all works just fine and I can access the webserver from outside of my local network.

The problem is that I cannot access the web server using the fqdn on my internal network. I want to be able to access my web server by the same address in our our of my local network.

I have looked at the reflection / nat settings under: Firewall -> Settings -> Advanced.

When I check mark the boxes for  (Reflection for 1:1) and (Sticky outbound NAT), I can access the web server locally as well as externally, but it is extremely slow. Like 30 plus seconds for a login that typically is milliseconds to respond.

It looks to me like a latency issue, but I am not sure. Any help would be appreciated.

Jodytek
Title: Re: access port forward web sever from internal lan
Post by: Evil_Sense on March 08, 2018, 06:06:20 pm
If you're using unbound as dns resolver for your internal lan, you could add an override for your ddns domain pointing to the local ip of your server.