OPNsense Forum

Archive => 18.1 Legacy Series => Topic started by: nj44451 on March 06, 2018, 04:14:19 am

Title: only use the WAN IP address
Post by: nj44451 on March 06, 2018, 04:14:19 am

I have 2 virtual IP addresses assigned and have adjusted the settings so that you will use the same IP address for a connection. (Made adjustments to the stick connection)

I have 2 outbound NAT rules set for servers so any data out will use the specified IP address. But my question is how can I force all other LAN traffic to simply only the Wan IP address and not use the other defined addresses.


Thanks,

Trent