OPNsense Forum

Archive => 18.1 Legacy Series => Topic started by: stone on February 13, 2018, 06:40:31 pm

Title: 18.1 puts my box into a boot loop.
Post by: stone on February 13, 2018, 06:40:31 pm

was running 17.7x, did the webGUI update to 18.1, and it worked fine, until i rebooted.

it boots the EFI, loads all the .ko files, shows blue text BOOTING, and then resets the box, loop.

(box: HP sff 6300, i3, 8gb, booting off 16gb sata SSD, two intel nics.)

okay fine, i'll do a fresh install...

burn the 18.1 to to a dvd, boot to that, loop.

wipe the SSD, just be sure it's not affecting the bootup. boot to the dvd, loop.

download the 18.1 .img file and write to a usb thumb drive, boot to that, loop.

write the image directly to the SSD, boot off that, loop.

...

download 17.7.5 installed that. everything is fine. reboots fine.

Title: Re: 18.1 puts my box into a boot loop.
Post by: franco on February 13, 2018, 07:13:39 pm

Hi there,

Yeah, FreeBSD 11.1 does this differently, unfortunately. E.g. https://forum.opnsense.org/index.php?topic=6841.msg29723#msg29723


Cheers,
Franco