OPNsense Forum
Archive => 18.1 Legacy Series => Topic started by: fabio on February 10, 2018, 12:01:08 pm
-
Hi All,
I've noticed that the "Automatic outbound NAT rule generation" in 18.1.x use "WAN" instead "WAN address":
I've an additional Virtual IP and i see the outgoing traffic sourced from both the address.
As workaround I replaced the automatic rules with the manual ones
Cheers
--
Fabio
-
Hi fabio,
That's the new default behaviour, so your workaround is the fix.
Cheers,
Franco
-
Thanks Franco
--
Fabio