OPNsense Forum

Archive => 18.1 Legacy Series => Topic started by: elektroinside on February 08, 2018, 03:25:03 pm

Title: 18.1.2 release
Post by: elektroinside on February 08, 2018, 03:25:03 pm
Quick feedback:

Upgrade from 18.1.1 was successful, smooth, no errors.
All my services are up and running, no issues so far.

Performance the same:
http://rcs-rds.speedtestcustom.com/result/89f04970-0cda-11e8-bb8d-15d42d0ab0bf

Congrats and thank you!
Title: Re: 18.1.2
Post by: rabievdm on February 08, 2018, 04:24:11 pm
Hi,

I think you're confusing everyone with your subject of 18.1.2 (TWO)
 :D
Title: Re: 18.1.2
Post by: hilfubsi on February 08, 2018, 04:43:15 pm
Upgraded too, all went well, thanks OPNsense :)
Title: Re: 18.1.2
Post by: Noctur on February 08, 2018, 04:46:14 pm
Version 18.1.2 is showing up in the firmware upgrade list, but it is not 'available' for update as yet. Maybe that's the confusion. It will most likely be tagged for update later this afternoon.
Title: Re: 18.1.2 release
Post by: franco on February 08, 2018, 05:33:07 pm
Some mirrors sync slower than others.


Cheers,
Franco
Title: Re: 18.1.2 release
Post by: DanMc85 on February 08, 2018, 06:38:41 pm
My ClamAV service plugin wont start since the .2 upgrade.  I will mess with it more to attempt to resolve.  Curious if anyone else has same issue?
Title: Re: 18.1.2 release
Post by: SirDux on February 08, 2018, 06:49:02 pm
I'm not running ClamAV but I am having problem with the Webproxy service, it will not start after the upgrade, The syslog shows the following when trying to start it, and also shows same after reboot of firewall

Code: [Select]
Feb 8 09:43:28 configd.py: [755646cc-d047-4bc3-824e-6ba2fe357737] returned exit status 1
Feb 8 09:43:28 root: /usr/local/etc/rc.d/squid: WARNING: failed to start squid
Feb 8 09:43:27 configd.py: [755646cc-d047-4bc3-824e-6ba2fe357737] starting proxy
Title: Re: 18.1.2 release
Post by: franco on February 08, 2018, 06:58:40 pm
Oh, my bad. Although I don't know why service goes through the root shell without being root... this is silly.

https://github.com/opnsense/core/commit/77534301

Reverting it will fix it...

# opnsense-patch 77534301

I'll issue a hotfix within the hour and disable upgrades temporarily.


Cheers,
Franco
Title: Re: 18.1.2 release
Post by: DanMc85 on February 08, 2018, 07:14:08 pm
Do I have to run that patch command then do the hotfix. Or can I just wait for the hotfix and not need to run that command?
Title: Re: 18.1.2 release
Post by: franco on February 08, 2018, 07:19:32 pm
Can patch and hotfix or wait for hotfix, does not matter.
Title: Re: 18.1.2 release
Post by: SirDux on February 08, 2018, 07:25:42 pm
just ran the patch from ssh and it works as expected :) , thank you for the awesome quick response
Title: Re: 18.1.2 release
Post by: franco on February 08, 2018, 07:31:23 pm
Well, you know what they say... Break it, own it.

Give me half an hour to sort out the mirrors, then everything will be back as the 18.1.2_2 update.


Cheers,
Franco
Title: Re: 18.1.2 release
Post by: franco on February 08, 2018, 09:13:45 pm
Done, changes as follows:

o console: do not yet check for root in console menu as it clashes with rc.d
o mvc: fix a typo in the new CRUD getBase() call, currently unused


Cheers,
Franco