OPNsense Forum

Archive => 18.1 Legacy Series => Topic started by: DarkBeard on February 02, 2018, 08:36:52 am

Title: Still some problems with the 18.1 release
Post by: DarkBeard on February 02, 2018, 08:36:52 am
1. When reconfiguring the interfaces, the web GUI falls
---------------
# /usr/local/etc/rc.restart_webgui
Starting web GUI...failed.
Generating RRD graphs...done.
---------------
      This happens when the CARP interfaces are temporarily blocked.

# /usr/local/sbin/lighttpd -f /var/etc/lighty-webConfigurator.conf
2018-02-01 11:45:22: (network.c.313) can't bind to socket: 192.168.144.254:443 Can't assign requested address


2. In the screenshots, the one and the other zoomlevel in 25 minutes, but the pictures are different.
https://yadi.sk/i/v8OqSYSt3RyXTc
https://yadi.sk/i/1V55xU0A3RyXb7


And about the problem of MultiWAN and DHCP, the forum is full of messages. :'( :'(
Title: Re: Still some problems with the 18.1 release
Post by: franco on February 02, 2018, 08:38:51 am
Are you restricting the web GUI listening interfaces?

Can you access the GUI even though that message is seen?


Cheers,
Franco
Title: Re: Still some problems with the 18.1 release
Post by: DarkBeard on February 02, 2018, 07:14:56 pm
I use the default settings (ALL recommended)
Even if I only use the LAN interface, the CARP address is also hung on it, and if I temporarily disable it, the situation will be the same, since I can not select only the interface address, without the virtual IP


The GUI interface is not available at this time. There are no processes in the system:
/usr/local/sbin/lighttpd -f /var/etc/lighty-webConfigurator.conf
/usr/local/bin/php-cgi




Title: Re: Still some problems with the 18.1 release
Post by: franco on February 03, 2018, 07:40:29 pm
I haven't seen this, but then again I don't have a productive CARP setting. That issue would have been the same on 17.7, no?

Lighttpd is set to "0.0.0.0", if it has a quarrel with an IP it gets from the system but can't use it that would be upstream territory.

Will you push a ticket for the health graph issue?

https://github.com/opnsense/core/issues


Thanks,
Franco