OPNsense Forum

Archive => 17.7 Legacy Series => Topic started by: 00DF00 on January 29, 2018, 07:04:05 pm

Title: WAN Failure / Doesn't renegotiate 17.7
Post by: 00DF00 on January 29, 2018, 07:04:05 pm

Hi all, have a cable modem connected to ISP, ethernet from modem to router running opnsense.

Cablemodem loses sync, but doesnt power down or anything, internet goes out, then Cablemodem re-syncs and then is up however the opnsense router never reconnects/allows routing from LAN to WAN until opnsense is reset.

Sometihng I can do to avoid this from happening?

Title: Re: WAN Failure / Doesn't renegotiate 17.7
Post by: kug1977 on January 30, 2018, 12:00:57 am

Hi,

which version have you installed, 17.7.12? Have seen these too. ou can try to downgrade to 17.7.10 and see, if these solves the resync.

# opnsense-revert -r 17.7.10 opnsense

Kind regards,
Kay-Uwe

Title: Re: WAN Failure / Doesn't renegotiate 17.7
Post by: kug1977 on February 03, 2018, 03:53:58 pm

Hi,

moving back to 10.7.10 and WAN renegotiate is working again. But it stay broken on 17.7.11, 17.7.12 and 18.1. As I'm on 18.1 now, I will open a new ticket there.

Thanks,
Kay-Uwe