OPNsense Forum

Archive => 17.7 Legacy Series => Topic started by: jorgevisentini on January 17, 2018, 07:03:20 pm

Title: Route DMZ with internal router
Post by: jorgevisentini on January 17, 2018, 07:03:20 pm

Hi all!

Sorry my english.

I do not know if they have already been through this situation ...
I am trying to create a routing as follows, I have a router connected on the internal interface of the OPNsense, and I need to communicate with the servers of the internal network, and the DMZ.
What happens is that with the internal network servers I communicate good, but the DMZ does not, although the routing is working ...
One thing I had to do was disable the "Static route filtering" option in OPNsense, otherwise it would not work.

I do not know if it's because I'm putting the router on the internal interface rather than putting it on a separate interface like a wan gateway, but the fact is it does not work ... and it's not routing the problem, because I can ping all the devices, including the DMZ.

Thanks!

Title: Re: Route DMZ with internal router
Post by: franco on January 17, 2018, 10:25:27 pm

Hi there,

Maybe this fails because of asymmetric routing? I am unsure about your setup though as that's hard to extrapolate.


Cheers,
Franco