OPNsense Forum

Archive => 18.1 Legacy Series => Topic started by: aynar on January 15, 2018, 12:00:05 pm

Title: [SOLVED] lightsquid error
Post by: aynar on January 15, 2018, 12:00:05 pm

hi everybody

i intalled opensense a few weeks ago
everything works correctly even the web proxy
but i have a probleme with lightsquid
when i type http://100.1.3.1/lightsquid/index.cgi,  i have this error:

LigthSquid diagnostic.
Error : report folder '/usr/local/www/lightsquid/report' not contain any valid data! Please run lightparser.pl (and check 'report' folder content)


i don't know if there is something to configure (may be in the proxy) i need help!!

Title: Re: lightsquid error
Post by: fabian on January 15, 2018, 04:45:10 pm

as the error message already tells you, you have to run a command from command like (lightparser.pl).

Title: Re: lightsquid error
Post by: aynar on January 16, 2018, 09:12:20 am

thanks for your response
i've tried to run it

/usr/local/www/lightsquid/lightparser.pl

but still have the same problem

Title: Re: lightsquid error
Post by: aynar on January 18, 2018, 09:32:06 am

thanks for your help
i found the solution
just by modifying the path of the file access.log in the file squid.conf