OPNsense Forum

Archive => 18.1 Legacy Series => Topic started by: marjohn56 on January 11, 2018, 01:40:24 pm

Title: 18.1.r1 failed to fetch
Post by: marjohn56 on January 11, 2018, 01:40:24 pm

Proceed with this action? [18.1.r1/y/N]: 18.1.r1

Fetching packages-18.1.r1-OpenSSL-amd64.tar: .. failed

Title: Re: 18.1.r1 failed to fetch
Post by: mimugmail on January 11, 2018, 01:47:43 pm

Try different mirror?

Title: Re: 18.1.r1 failed to fetch
Post by: marjohn56 on January 11, 2018, 01:54:33 pm

I did.. I'll try another one, tried opnsense and default.. cloudflare still no go.

Can I spec the repo in the command line?

Title: Re: 18.1.r1 failed to fetch
Post by: marjohn56 on January 11, 2018, 02:02:39 pm

Never mind. I've downloaded the image from the web, I'll do a clean install later.

Title: Re: 18.1.r1 failed to fetch
Post by: franco on January 11, 2018, 03:26:31 pm

Safety belts... safety belts everywhere...

Symlinks on the mirrors are missing to allow this upgrade. They will be there by the end of the day. The intended upgrade path will work once 17.7.12 hits. :)


Cheers,
Franco

Title: Re: 18.1.r1 failed to fetch
Post by: franco on January 11, 2018, 04:16:16 pm

Symlinks are in place now and tested ok...

Title: Re: 18.1.r1 failed to fetch
Post by: nivek1612 on January 11, 2018, 06:24:08 pm

Still claims no update option in the GUI

Although I can see it listed

Am I doing something stupid or is that intentional

Title: Re: 18.1.r1 failed to fetch
Post by: marjohn56 on January 11, 2018, 06:39:56 pm

Methinks you should download the image and install clean from the shell lad. :)

Title: Re: 18.1.r1 failed to fetch
Post by: franco on January 11, 2018, 06:59:59 pm

No update from the GUI until 17.7 is EoL and 18.1 is out.

It's a bit funny. There was a release when we added the upgrade glue too early and a number of people found it stupid that the upgrade wasn't out but it said they could upgrade.

Now it's out but not able to upgrade yet...

Need to work on our timing to sync this, eh? :)


Cheers,
Franco

Title: Re: 18.1.r1 failed to fetch
Post by: marjohn56 on January 11, 2018, 07:04:03 pm

OK, well it's installed and up and running on my test, no issues apart from a dodgy USB stick.

Think it's time to give it a name though, "insert name here" is a bit sad. :)

Title: Re: 18.1.r1 failed to fetch
Post by: nivek1612 on January 11, 2018, 07:09:40 pm

LOL

I have a usb stick in my hand, if i go quiet it means it didn't go well :-)

Title: Re: 18.1.r1 failed to fetch
Post by: franco on January 11, 2018, 07:10:21 pm

Good luck!  ;D

The name is a last minute surprise :)

Title: Re: 18.1.r1 failed to fetch
Post by: ivoruetsche on January 11, 2018, 07:42:05 pm

Hi all

18.1.r1 is a release candidate?

If I press "Check for updates" on all of our production firewalls, this version is also listet as an update. Was this expected?

gruss ivo

Title: Re: 18.1.r1 failed to fetch
Post by: franco on January 11, 2018, 07:44:25 pm

Yep, it's a listing of all published versions... we've always listed release candidates so you can browse the change log.

Title: Re: 18.1.r1 failed to fetch
Post by: nivek1612 on January 11, 2018, 09:11:26 pm

Eh Franco what did we do wrong in Europe not to get the vga image on the mirror :-)

Rest of the world got it  ;D

Title: Re: 18.1.r1 failed to fetch
Post by: franco on January 12, 2018, 07:01:53 am

Thanks for the hint, the mirror administrator said snort blocked rsync but now that's sorted.


Cheers,
Franco

Title: Re: 18.1.r1 failed to fetch
Post by: elektroinside on January 12, 2018, 01:02:31 pm

Hi guys,

No upgrades to 18.1.r1 from the GUI, this I understood :)
But can i upgrade from the console?

Nothing seems to work, definitely, i'm not doing it right.
Can you please help me out?

Thank you!

Title: Re: 18.1.r1 failed to fetch
Post by: franco on January 12, 2018, 01:51:41 pm

Hi there,

The built-in console update code will work in 17.7.12 after audit, testing, a good sleep and agreement that nothing will go wrong. Please be patient. :)


Cheers,
Franco

Title: Re: 18.1.r1 failed to fetch
Post by: elektroinside on January 12, 2018, 02:04:58 pm

Ok, thanks Franco  :)

Title: Re: 18.1.r1 failed to fetch
Post by: marjohn56 on January 12, 2018, 02:54:54 pm

Quote from: franco on January 12, 2018, 01:51:41 pm

Hi there,

The built-in console update code will work in 17.7.12 after audit, testing, a good sleep and agreement that nothing will go wrong. Please be patient. :)


Cheers,
Franco

Of course it won't go wron...

# buffer overflow
# core dumped
# press any key to reboot

Title: Re: 18.1.r1 failed to fetch
Post by: tong2x on January 09, 2019, 05:17:10 am

hello

no go on both webUI and console

on console after checking for conflict (zero conflit)
it says "nothing to do"
and other "nothing to do"
followup by "starting web IU..."
then back to the mains

Title: Re: 18.1.r1 failed to fetch
Post by: marjohn56 on January 09, 2019, 07:39:08 am

This thread was for 18.r1, that was a year ago.  :)


19.r1 is not released yet. When it is the upgrade will work.

Title: Re: 18.1.r1 failed to fetch
Post by: tong2x on January 11, 2019, 03:32:32 am

oh yeah sorry

something wrong with my eye... haha
not paying too much attention with the number, sorry