Post by: mayo on December 27, 2017, 02:43:43 pm
made a new OPNSense installation on an apu2c4 board. No VLANS, DHCP on Lan No Rules. Just a fresh install from scratch.
The problem is that my mac, could not find on network TimeCapsule. I can see the capsule on dhcp leases but backups can not start with the warning "no timecapsule found on network". With the sophos xg 17 that i have tried before everityng went fine (but I prefer opnsense!)
thank you so much!
Post by: bartjsmit on December 27, 2017, 03:25:58 pm
You may need to bridge the two lan interfaces if they're not. Also check the requirements https://developer.apple.com/library/content/documentation/NetworkingInternetWeb/Conceptual/TimeMachineNetworkInterfaceSpecification/TimeMachineRequirements/TimeMachineRequirements.html
Bart...
Post by: mayo on December 27, 2017, 04:00:39 pm
Yes same passive switch connected to a single port on apu board lan port... it seems that manually adding TimeCapsule on dhcp reservation works. Very strange!
Post by: fabian on December 27, 2017, 04:37:02 pm
If you have multiple Networks you may be interested into the mdns-repeater plugin ans the linked site says that it is using mdns.
Post by: mayo on December 28, 2017, 09:33:03 am
Post by: Zeitkind on January 04, 2018, 04:21:54 am
http://tildesoft.com/files/BonjourBrowser.dmg
Post by: mayo on January 07, 2018, 05:25:18 pm
Post by: fabian on January 07, 2018, 07:23:57 pm
Post by: mayo on January 14, 2018, 03:26:45 pm
Something due to DNS in lan? Or IPv6 related?
(I still have no rules or routing on opnsense, just install as is)
In the meanwhile I'm waiting for 18.1 and try a fresh install...
Post by: fabian on January 14, 2018, 08:04:37 pm
Some news: no backups since 3 days. If I reboot the Timemachine than the backup starts. I checked the arp table of opnsense and (for the timemachine) i can see yhe mac address and the ip adress but the hostname is not resolved.Does the DHCP request contain the required information and are the hostnames of DHCP hosts registered in DNS?
Something due to DNS in lan? Or IPv6 related?Probably not IPv6 related but it may has to do with broadcasts or multicasts which do not happen as often as it may be required.
In the meanwhile I'm waiting for 18.1 and try a fresh install...Will probably not be a huge difference. As far as I know there are currently no changes pending, which are DNS related. The only difference may be WPAD support which may come if I have time to write it.
Post by: mayo on January 15, 2018, 04:07:51 pm
Post by: mayo on January 21, 2018, 04:02:09 pm
I'll check as soon as I'll at home. One question: how to register DHCP hosts in DNS? I want to be sure to have DNS configured in a good way... Thank you so much!Some News: I’ve enabled DHCP stuff in Unbound DNS and now it seems to work... Thanks Everyone!
Inviato dal mio iPhone utilizzando Tapatalk