OPNsense Forum
English Forums => Web Proxy Filtering and Caching => Topic started by: lezidev on December 22, 2017, 11:29:37 am
-
Hello everyone
In my training project, I need to set up a captive portal connected to a wireless access point. The last one distributes DHCP on the LAN interface. I have two network cards not three as suggested in documentation tutorial ; it's not possible so I tried on two cards configuration.
I have an issue on the captive portal, more precisely on the web GUI. Actually I tried to add http and https transparent proxies on it which is on the LAN network card.
However when I did this, it was on the LAN interface (web GUI and guestnetwork are on this interface) and now I can't get access on the GUI. It makes sense, this is what the transparent proxies should do.
Of course I'm stuck now.. I tried to undo the LAN interface on my server but it appears the configuration is still the same.
N.B. The captive portal still work on the LAN interface
LAN is : 10.100.70.0
WAN is : 10.100.71.0
and the Web GUI is on 10.100.70.254
EDIT: I tried this on account of HTTPS certificate issue when clients need to log on but the browser shows certificate error.
-
To make the connection with dev reply on Github :
easiest steps to reconfigure your box, with a factory reset is to flush all firewall related configurations, go to the gui and then reapply settings when done.
ipfw flush
pfctl -d
Then configure your firewall, next your captive portal....