OPNsense Forum
Archive => 17.1 Legacy Series => Topic started by: punsikorn49 on December 20, 2017, 10:49:14 am
-
Hey Guys,
having a problem with opnsense, Im running 17.1.8 on an Intel NUC, my WAN connection is a USB to Ethernet dongle and after configuring the interface everything works fine.
BUT, once i reboot the PC the WAN interface just disappears, I have to manually add it again in the interfaces menu. บอลสเต็ป2 (https://www.ufa88.com/แทงบอลสเต็ป/)
Weird huh? anyone else come across this issue?
-
Most likely this is a timing issue. Add the os-boot-delay from System, Firmware, Plugins and test again?
Bart...
-
There is a topic here about a specific USB ethernet dongle.
I have that model at home, and have those issues as well.
Seems to be crappie FreeBSD support AFAIK.
-
USB is tricky... it's there... sometimes it's not... in your interface config you can set the interface to locked mode so it won't disappear during auto-recover.
Cheers,
Franco