OPNsense Forum
Archive => 17.7 Legacy Series => Topic started by: moellerheide on October 25, 2017, 07:00:49 am
-
Hi,
i'm using opnsense the last years without any issue, but now i've got a problem i can't handle.
I've got an pppoe as WAN (Telekom VDSL - working flawless for years) and just want to add an second WAN connection for failover (Vodafone cable) which uses DHCP. Everything is working, but if i reboot the opnsense while the Vodafone dhcp-server is not reachable (modem offline), the WAN2 interface get's 0.0.0.0 as IP and so its not possible to set the default route for opnsense -> no traffic from LAN to WAN.
In "Interfaces / Overview" i can see, dhcp for WAN2 is marked "UP" - if i "renew" dhcp lease on WAN2 it is marked "down", the 0.0.0.0 on WAN2 is gone and i can setup an default route via pppoe.
It seems to be a problem with dhcp lease on startup - any idea? Am i doing something wrong?
opnsense 17.7.6
wfr
Michael
-
Hi Michael,
Some modems can give out faulty leases. You can find out which IP this doing this and add it to the blacklist under Interface: [WAN]: "Reject Leases From".
Cheers,
Franco
-
Hi Franco,
faulty leases could be an option, but in my case the new vodafone modem is still "offline". There's nothing connected to the wan2-opnsense-interface - nevertheless after an reboot the DHCP is marked "up" with ip "0.0.0.0"
Michael
-
uncheck block private IPs from the interface WAN and try if you get an ipadress from the 192.168.100.x block
The Vodafone (KD) Modems often have a webinterface on 192.168.100.1
Is the bridgemode activated for the cablemodem? else you allways get private ips from the cable modem
-
Hi Nils,
bridge mode is activated and i'm not getting an ip in the Range 192.168.x.x. The problem still exists even if the modem ist powered off -> no change to get a wrong answer by the modem.
Michael