OPNsense Forum
Archive => 17.7 Legacy Series => Topic started by: sens_ible on October 19, 2017, 08:26:44 pm
-
I have installed the freeradius plugin and so far it is working fine. I can access the radius server from devices in my LAN and have them authenticated.
Now I want to setup a captive portal and want the captive portal to use the internal radius server for authentication.
So I created an internal radius server in System/Access/Servers and gave it the address 127.0.0.1 for the local host.
Afterwards, I have said internal radius server available in:
"Captive Portal"/"Edit Zone"/"Authenticate using"
However, the internal radius server does not do what I want. When I do a test in System/Access/Testers I do not get a reply.
How do I have to set up an internal radius server in System/Access/Servers so that I can use the freeradius server which is already installed?
-
Have you setup localhost as client in Freeradius?
-
Yes, set up a client:
Enable: [ x ]
Name: xxx
Secret: yyy
IP: 127.0.0.1/8
Hit save, then apply.
Works like a charm, just tested this.
Cheers,
Franco
-
Hi both,
I had the similar problem with a all new installation from USB-Stick, upgrading to 17.7.8 and then starting Radius.
It did not. Had to delete manually and reinstall - now it works. But I don't know why?
Markus
-
Don't know either without the log messages. :)
Cheers,
Franco