OPNsense Forum

English Forums => Hardware and Performance => Topic started by: vikozo on October 09, 2017, 10:09:42 am

Title: error Installing/writing to Solid State Module (SSD)
Post by: vikozo on October 09, 2017, 10:09:42 am
Hello
i wish to install opnSense on my apu2c4 and on a KINGSTON SSDNow mS200 Drive, 240GB (SMS200S3/240G)
and got some error like below - any Help and sugestions?

ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <KINGSTON SMS200S3240G 60AABBF0> ATA8-ACS SATA 3.x device
ada0: Serial Number 50026B727604CD6B
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 228936MB (468862128 512 byte sectors)
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <SanDisk Ultra Fit 1.00> Removable Direct Access SPC-4 SCSI device
da0: Serial Number 4C530001171222117185
da0: 40.000MB/s transfers
da0: 14832MB (30375936 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 998149704 Hz quality 1000
Trying to mount root from ufs:/dev/ufs/OPNsense_Install [ro,noatime]...
Mounting filesystems...
tunefs: soft updates set
(da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 00 00 10 00 00 10 00
(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(da0:umass-sim0:0:0:0): Retrying command

(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(da0:umass-sim0:0:0:0): Retrying command
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 00 80 00 00 10 00
(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(da0:umass-sim0:0:0:0): Error 5, Retries exhausted
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 00 10 00 00 10 00
(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(da0:umass-sim0:0:0:0): Retrying command
^C(da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 00 10 00 00 10 00
(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(da0:umass-sim0:0:0:0): Retrying command
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 00 10 00 00 10 00
(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(da0:umass-sim0:0:0:0): Retrying command
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 00 10 00 00 10 00
(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(da0:umass-sim0:0:0:0): Retrying command
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 00 10 00 00 10 00
(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(da0:umass-sim0:0:0:0): Error 5, Retries exhausted
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 00 00 00 00 10 00
(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
Title: Re: error Installing/writing to Solid State Module (SSD)
Post by: franco on October 09, 2017, 10:52:45 pm
Hi,

Is this after install with Serial image or Nano image written directly to disk?


Cheers,
Franco
Title: (SOLVED) Re: error Installing/writing to Solid State Module (SSD)
Post by: vikozo on October 19, 2017, 11:13:53 am
it works now after taking them out and back  :P