OPNsense Forum

English Forums => General Discussion => Topic started by: dvanleur on September 07, 2017, 08:00:53 pm

Title: [SOLVED] Netflow Destinations does not save
Post by: dvanleur on September 07, 2017, 08:00:53 pm

Hello,

When i configure a external destination for netflow through the webinterface it disappears when i go to a other page and back to netflow again, if i configure capture local then everything is working fine.
Does someone a idea what this can cause?

Thank you.

Title: Re: Netflow Destinations does not save
Post by: mimugmail on September 07, 2017, 08:02:14 pm

After writing the ip address type space or enter and then save

Title: Re: Netflow Destinations does not save
Post by: dvanleur on September 07, 2017, 08:15:34 pm

that did the trick. Thank you very much.

Title: Re: [SOLVED] Netflow Destinations does not save
Post by: propellerhead333 on January 06, 2018, 02:51:02 am

THANK YOU!!!!

Title: Re: [SOLVED] Netflow Destinations does not save
Post by: fransvmd on October 14, 2019, 02:25:58 pm

This does NOT work for me. I enter an adress like 1.2.3.4:9995 press space, press save. Then it disapears. I dont get any udp traffic from there, and in /usr/local/etc/netflow.conf theres still: netflow_destinations="127.0.0.1:2056"

Title: Re: [SOLVED] Netflow Destinations does not save
Post by: mimugmail on October 14, 2019, 04:13:36 pm

This was a bug introduced with 19.7.5 and is already fixed in 19.7.5_5 .. just search for new updates

Title: Re: [SOLVED] Netflow Destinations does not save
Post by: fransvmd on October 15, 2019, 10:00:47 am

We had patch day last sunday and then the update wasnt there yet :/ well thanks for the info anyway im gonna try it  :)