OPNsense Forum

Archive => 17.1 Legacy Series => Topic started by: Frittenfett on July 13, 2017, 04:27:07 pm

Title: Proxy: blacklist not working?
Post by: Frittenfett on July 13, 2017, 04:27:07 pm

Hello,

I would like to setup my proxy to block everything except some whitelisted sites.
My configuration looks like this ->> see attachments.

This configuration is still allowing all traffic but I can't see my problem here?
Firewall rules aren't important in this case: clients are located in a different subnet and a different firewall is blocking all non-proxy-traffic.

Regards,
Tim

Title: Re: Proxy: blacklist not working?
Post by: Julien on August 01, 2017, 01:31:44 am

Have you created the NAT rules so the users won't pas the proxy ?

Title: Re: Proxy: blacklist not working?
Post by: bartjsmit on August 01, 2017, 08:10:07 am

Quickest test to confirm a proxy is working is to browse to a non-existent website (e.g. http://thisisdefinitelytoolongtobearealwebsite.net) and see if you get the Squid error message, or the message from your browser.

Bart...

Title: Re: Proxy: blacklist not working?
Post by: Frittenfett on August 01, 2017, 05:20:11 pm

Quote from: bartjsmit on August 01, 2017, 08:10:07 am

Quickest test to confirm a proxy is working is to browse to a non-existent website (e.g. http://thisisdefinitelytoolongtobearealwebsite.net) and see if you get the Squid error message, or the message from your browser.

Bart...

This part seems working fine:

Title: Re: Proxy: blacklist not working?
Post by: Julien on August 25, 2017, 03:59:29 pm

you need to create a NAT rules for both http and https so the users won;t by pass the proxy and its will force every traffic to go through the proxy.