OPNsense Forum

Archive => 17.1 Legacy Series => Topic started by: soernt.poppe on July 07, 2017, 02:00:12 pm

Title: After updating to 17.1.9 NAT is not working correctly
Post by: soernt.poppe on July 07, 2017, 02:00:12 pm

Hi there,

I updated to 17.1.9 and now a configured NAT port forwarding is not working anymore.
Strange thing: I use the FTP-Proxy plugin which also uses port forwarding and that is working correctly.

I deleted the port forwarding and recreated it again. Also I did a reboot after that but nothing helped :-(

I attached some screen shots what I have configured:
I would like to forward HTTP and HTTPS to 192.168.90.2

Any ideas what I should do here?

Kind regards,
Sörnt

Title: Re: After updating to 17.1.9 NAT is not working correctly
Post by: soernt.poppe on July 10, 2017, 03:09:57 pm

I backuped my configuration and installed OpenSense from download. After restoring my configuration, the NAT is working again.

The latest version to download is 17.1.4. Is there a change to update to 17.1.8 instead of 17.1.9 (latest)?
I can't find a download for 17.1.5, 17.1.6, 17.1.7 and 17.1.8

Did I miss here someething?

Title: Re: After updating to 17.1.9 NAT is not working correctly
Post by: guest15389 on July 11, 2017, 04:26:47 pm

I'm running the latest with NAT working on a few rules like that. Normally, they don't release every version as a download so I'm not sure how you would just upgrade to .8 as that example.

Your rules look similar to mine although it looks like you renamed or did something with the default interface names?

My rules look like this:

(http://i.imgur.com/ZnKF9O3.png)

and

(http://i.imgur.com/QVJnQcc.png)

Not sure if that helps, but the naming/screens just look different from what I've seen.