OPNsense Forum

English Forums => General Discussion => Topic started by: tuaris on June 26, 2017, 03:05:05 am

Title: [SOLVED] IPSEC - Multiple Phase 2 with M0n0wall
Post by: tuaris on June 26, 2017, 03:05:05 am

I've migrated one of my firewalls from M0n0wall to OPNSense.  I'm having trouble with one of my IPSEC tunnels.  prior to the migration I had the two m0n0walls configured with two IPSEC tunnels (each with their own P1 and P2 entries).  Reason is because I had multiple networks behind each of the appliances that needed IPSEC tunnels (see diagram). It worked well.

(http://venus.morante.net/downloads/unibia/screenshots/tunnels.png)

I'm having trouble getting the same setup migrated over to OPNSense.  I tried setting up one Phase 1 and two Phase 2, but the m0n0wall end has trouble making the connection.

Title: Re: IPSEC - Multiple Phase 2 with M0n0wall
Post by: tuaris on June 26, 2017, 04:53:07 am

Looks like you can just setup the multiple phase 2's on the OPNSense end and it does indeed work okay.  I had to make sure the two Phase 1's are the same on the m0n0wall end.