OPNsense Forum
Archive => 17.1 Legacy Series => Topic started by: pbolduc on May 01, 2017, 08:29:32 pm
-
Hi,
I have a setup where there are two isolated networks. VLANID:1 (192.168.1.x) & VLANID:2 (192.168.100.x) I would like the management interface for OPNSense to be available remotely on both internal management interfaces. For instance:
If VLANID:1 Ethernet Port 1 is 192.168.1.1 Then from a public computer I would like to be able to navigate to http://my_public_ip:4443 to access the OPNSense web interface.
If VLANID:2 Ethernet Port 2 is 192.168.100.1 Then from a public computer I would like to be able to navigate to
https://my_public_ip
The reason for this, is regardless of what interface is connected there will always be an accessible remote management interface. I do not plan on using both interfaces at the same time but i'd like the option available depending on what interface is plugged in to be automatically setup and functional for remote configuration.
Presently, I can remote administer the OPNsense router by going to https://my_public_ip
However, when I create a NAT rule on the WAN port for 4443 to map to 192.168.1.1:443 it fails to connect me to the OPNSense Web Interface, the connection times out.
I can access both https://192.168.1.1 & https://192.168.100.1 from each internal network to manage the router.
Nevermind, I accidentally typo'd the remote WAN hostname compliments of autofill.