OPNsense Forum

English Forums => General Discussion => Topic started by: Tempors on April 21, 2017, 04:00:35 am

Title: [SOLVED] Firewall/Routing Question
Post by: Tempors on April 21, 2017, 04:00:35 am

Hi,

I've been reading the forums and other documentation I could find.
But I'm still not sure this software can do I what I'm looking for.
Currently using Firewall called Smooth wall with 4 Nics.

It works, but not fully what we are looking for, and version we have  running is old.
So before re-installing and upgrading, just looking for some thing better/different.


1 Public IP

1 Network 192.168.0.0
1 Network 10.0.0.0
1 Network 192.168.1.0

Two networks need to fully talk to each other, which Smooth Wall can't do.
Third to be DMZ

Also could this one handle more Nic's?

Thanks

Title: Re: Firewall/Routing Question
Post by: weust on April 21, 2017, 08:11:59 am

If you set up the rules properly then your networks can talk to each other.
More NICs won't be a problem either.

Title: Re: Firewall/Routing Question
Post by: Tempors on April 23, 2017, 12:37:53 am

Thanks for the Reply.

seems to work fine.

I have one problem.  the OPNSense WebSite is showing up on my Public IP

I'm trying to forward to all Web Traffic to 10.0.0.27 Port 80 But OPNsense is showing up
I went to administration screen, and changed the port and clicked on
Disable web GUI anti-lockout rule and disable web gui redirect rule.

Am I doing something wrong?

Title: Re: Firewall/Routing Question
Post by: weust on April 23, 2017, 01:26:59 am

Looks like you have the WAN and LAN ports switched. Switch the cables?

Title: Re: Firewall/Routing Question
Post by: Tempors on April 23, 2017, 11:42:35 am

Issue was, I don't know how to read.

Had to just check the box and change the port.

Same with other issue. Was picking the wrong option in port forward.

Thanks for your help.