OPNsense Forum

Archive => 17.1 Legacy Series => Topic started by: shornesr on March 29, 2017, 02:56:08 pm

Title: How to use Virtual IPs for IPSec site to site tunnel
Post by: shornesr on March 29, 2017, 02:56:08 pm

I was wanting to try using a virtual IP to set up a site to site IPSec tunnel. I can get it to work just fine using the WAN address but I see no options for selecting the Virtual IP address...
I can also port forward using the Virtual IP and hit my web server that way.
I just do not see a way to set up an IPSec VPN using one of the Virtual IPs...

Title: Re: How to use Virtual IPs for IPSec site to site tunnel
Post by: thale on March 29, 2017, 04:41:11 pm

In the IPSEC phase 1 screen, you should have a drop-down box for Interface.  Your virtual IP address should appear in that drop-down box.

Title: Re: How to use Virtual IPs for IPSec site to site tunnel
Post by: shornesr on March 29, 2017, 05:37:05 pm

That's what I thought but here are images of the settings and what shows...

Title: Re: How to use Virtual IPs for IPSec site to site tunnel
Post by: shornesr on March 29, 2017, 05:51:16 pm

I think I was looking in the wrong place... In the "Interface" drop-down list I found the Virtual IP... I will try that...