OPNsense Forum

Archive => 17.1 Legacy Series => Topic started by: korbinian on March 20, 2017, 10:49:39 pm

Title: Track Interface - RA Issue
Post by: korbinian on March 20, 2017, 10:49:39 pm
Hello,

when an interface is configured as tracking interface on an IPv6 enabled gateway, you can not configure the settings for router advertisements. Why is this only possible with an static configured interface?

Thanks.
Title: Re: Track Interface - RA Issue
Post by: mschaeffler on May 07, 2017, 11:19:24 am
Hello,

I'm also interested in this question.

Thank you
Title: Re: Track Interface - RA Issue
Post by: djGrrr on May 07, 2017, 04:35:57 pm
Track interface automatically enables and configures Router Advertisements when it get's it's prefix delegation.
Title: Re: Track Interface - RA Issue
Post by: franco on May 08, 2017, 06:40:00 am
Let's ask a different question... what setting do you want to change?


Cheers,
Franco
Title: Re: Track Interface - RA Issue
Post by: djGrrr on May 08, 2017, 03:52:24 pm
Personally i think that Router Advertisements should be able to be configured for Track Interface interfaces.
Even the DHCPv6 server should be able to be configured, with Static Mappings, Range and Prefix Delegation Range config options being disabled when Track Interface is used. It should be easy enough to startup the DHCPv6 server when a valid range has been assigned to the interfaces, just like it starts up the RA deamon.
Title: Re: Track Interface - RA Issue
Post by: mschaeffler on May 08, 2017, 06:03:17 pm
Hello,

I would like to use DHCPv6 to get the IPV6 addresses (leases) available via DNS.
Title: Re: Track Interface - RA Issue
Post by: korbinian on May 10, 2017, 12:41:10 pm
Personally i think that Router Advertisements should be able to be configured for Track Interface interfaces.
Even the DHCPv6 server should be able to be configured, with Static Mappings, Range and Prefix Delegation Range config options being disabled when Track Interface is used. It should be easy enough to startup the DHCPv6 server when a valid range has been assigned to the interfaces, just like it starts up the RA deamon.

I am with djGrrr. Configurable Router Advertisements and DHCPv6 with Track Interface interfaces would be the feature for me to switch to OPNsense in production.
Title: Re: Track Interface - RA Issue
Post by: franco on May 10, 2017, 03:43:21 pm
Jolly good, who's up for some coding? :)